The Jalopy Journal
I am in fitting hell! I am running 3/8" steel fuel lines. I can't imagine that I am the only one in this hell. I am running steel 3/8" fuel...
At some point he will ask for money before you see it. Ask for a unique video, i.e., with today's paper, showing him talking to you with car in...
Got to real computer and found my answer. Pete/Jakes part# 1211. 11/16" bushings.
A little progress. Starting to look pretty. Downhill from here. [IMG]
I'm running an original model a spring with an 11/16 spring eye. I have aftermarket perches with 3/4 eye. On hand, I have the original 11/16...
[IMG] [IMG] [IMG] [IMG] [IMG]
I'm still here. I've lost some interest in the hamb after they changed the format/layout. I'm still working on the project but it's moving slow....
I guess I'm at a loss. I looked for rules/instructions but couldn't find them. So I can't submit this because it's an older post? Posted using...
worth a shot... Basic Part Stamper http://www.jalopyjournal.com/forum/showthread.php?t=845062
Ooookay.... Feels like junior high around here sometimes. Thank you.
296 V8 aka Ansen axles -- banned? Am I allowed to ask why? I bought an axle off him. He was an alliance vendor/hamb-odex guy. I'm was...
Probably get a lot of haters, but I've been running a harbor freight two stage, 60 gal for a couple years without a hiccup. Keeps up with my...
http://static.speedwaymotors.com/pdf/910-64017.pdf
Sorry, missed your question... I used my trusty Harbor Freight part stamper. I have a thread on that in this forum. Posted using the Full...
Thanks. Just finishing my first gas welding adventure. David Gardiners video motivated me to try it over MIG. Not as easy as he makes it out, but...
Here's a photo of me testing on a blank piece if sheet metal. [ATTACH] Posted using the Full Custom H.A.M.B. App!
I have to do the other side. Hopefully I will remember this time. The most difficult part is fitting/positioning the whole mess into the press.
Nice!!!
Another use for my part stamper! [ATTACH][ATTACH][ATTACH][ATTACH] In this case I clamped a piece of 1/8" plate on top of the wood to avoid all...
Some update photos. I spent a day working on the inner fender. A lot of work and I could have bought a panel for $30, but it's just not the...
Either way would work, I guess.
18 ga
Well, good thing I have a torque arm. Anyway..... Back to my build.... Working on the firewall, tunnel and floor. I'll get some pics up in...
I have to say that this isn't going to work for every scenario. In my case I only had two corners with compound curves. If all four corners...
the jigsaw blade width was all that i removed.
Good to know. Thanks! BTW this was 18 ga sheet metal.
[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH] I thought I would share this since it came out decent and was done with no fancy...
Here's what I did. Seems to me like it's what it should have been from the start.[ATTACH] Posted using the Full Custom H.A.M.B. App!
I know the is an old thread. I'm in the same boat. I'm planning to straighten the brake arm and dog leg the clutch to the left. But what did...
Thanks. Started the firewall flip yesterday. [IMG]
Separate names with a comma.
The Jalopy Journal
