The Jalopy Journal
I’m learning here , if I get the jeep 44 axle with those dimensions , I can chop the long size down to 21 1/4 and use the short axle on both sides...
I wasn’t aware of that , I’ll look into it , thanks
Here’s the thing my 41 axle has the same axle shaft on both sides at 30.04 “ each so I wish I had one of the short ones I think around 22” on the...
All ideas appreciated , thanks all
What I wanted to do was to obtain the shortest rear axle I could get , the 41 Dana I have has the 19 spline axles at around 30” long both sides ,...
A 25 or 27 would do also
Any body got an old military jeep rearend laying around for sale , looking for short axles early pre ww2 set up
Is there a specific lug nut for the factory 1935 ford 16x 5.5 wire wheels or special pitch on it are they the 1/2 x 20 standard ford ?
If you find it shoot me a price , may be interested, thanks
No sir , it’s the tiny v8-60 engine with the recessed flywheel , it takes the 8.5 “ clutch
How much for a good clutch ? Plus ship to ky USA
How much for the clutch ?
Looking for a good used or new clutch for a 1938 ford not the full size engine Henrys baby ,small engine v8-60 ,clutch is 8.5” x 10 spline , would...
What aftermarket fuel tank is easiest to fit on rear of frame to use existing fuel spout hole in side of truck , or is there any ? 1936 ford 1/2...
Is there a better option for a steering box to be smoother on a 46 ford pickup
I was running straight linkage on 2 super7 generic strombergs from speedway that ran fine but after talking with Charlie Price owner of vintage...
I am running an offenhauser 1090 style dual
I’m putting 2 Holley 94’s on my 59a with progressive linkage to start I’ve got 4.5 power valves in both carbs the secondary has no 50 jets the...
I bought new from speedway to break in new rebuild while my Holley 94’s were being rebuilt , fixing to change out have put total of 450 miles on...
I’ve got progressive linkage and evenly spaced carburetors
Will putting 4” risers under Holley 94 carburetors affect starting or performance of a flathead ford 59a engine , 3/4 race cam set up .060...
So do you use both or one or the other ?
I’m seeing a lot of controversy over which thermostats to use in a 59a for best cooling , what have you guys had work the best in your flatties
I am running evans waterless coolant with a2psi radiator cap , will that cause lack of pressure through the heater to work properly ?
Has any body added vintage heat and air to their flathead ford 59a if so can you use a nipple in the radiator drain for the heater supply hose or...
Is there a clearance difference in using a sb Chevrolet verses the bb Chevy water pump on a gen 1 hemi engine ?
What valves are everyone using these days for the crappy fuel we have to burn
Looking to buy a , k r Wilson valve guide removal tool
Make me an offer I can’t refuse
Separate names with a comma.
The Jalopy Journal
