The Jalopy Journal
Before I send the wrong screw into my window garnish to install my 1/4 windows, does anyone know the screw specs.....8, 10 for example?
Can someone verify, before I use the wrong tap, that the mounting holes in the windshield frame that take the 2 bolts/screws from the windshield...
I have a feed wire coming from my headlight switch to feed the lights in my gauges. I have 4 gauges, each with a separate wire that I need to...
I thought I remembered a thread with custom seats pics......coming up empty so for with the search function....does it ring a bell with...
Working on the pulleys and belt on my sbc. I noticed the crank pulley is 1/8" closer to the block than the water pump pulley. Hence my belt is...
I originally bought this flywheel for a 283.... http://www.summitracing.com/parts/nal-14085720/warnings/ I now want to put it on an '87 305...
I cant be the first schlep to set a pinion angle on a chassis without the body, glass, interior ETC. in other words a complete car. So for those...
....Okay.......large shed find.........At any rate I have been working on buying this car for about a year. The owner purchased the car in 1970 at...
I have an edelbrock carb, 600 cfm, on a small block stroker. Truck starts right up when cold....truck also starts right up, when warmed up,...
Didn't pay attention to which two metering jets I took out of which two holes. I have two jets marked 395 and two jets marked 400 1) which set...
Working on trying to salvage/ rebuild the rear end on my truck....the axle tube is pitted in some areas from rust......does any body have a rough...
I'm not having any luck finding a swatch for DP's Red epoxy primer(dp74lf) Can somebody who has painted their ride in this color throw up a pic...
I am in the process of a front end tear down on my '59 1/2 ton Apache. I will be sending off my OEM axle to Sid... http://www.droppedaxles.com/...
I bought my truck '59 Chevy Half ton which came with a running (what appears to be stock)283. It did have a 7 qt. oil pan which used to leak...
I cannot get the idle down. I've got it bolted to a 283. When I try to back off the idle screw the motor dies. I'm guessing the lowest rpm I...
I think my terminology was correct... My OEM 350 sbc was decked to about .014 the first time it was at the machine shop while it was being...
Separate names with a comma.
The Jalopy Journal