The Jalopy Journal
[ATTACH] [ATTACH] anybody know anything about these two coupes?
Im really thinking about chopping one more inch,from the guys that have one chopped this much do you regret it and why?
I'm needing to purchase some Lincoln front and rear brakes,is mt or Wilson my best bet, who has the best drums, thanks
Does anyone make the thick black gasket for this light,thanks and marry xmas.
what the story on these backing plates,will new parts interchange,what the going price?who the best vender to get parts from?,also whats the best...
Trying to decide if my boxed 32 frame would look better with the factory fender, running board, and steering holes, what's the best print to...
I just got a 54 235 hp short bell 331,I am going to pull it from the New Yorker and use it for a model a coupe build, I don't really have the time...
Can u make a hilborn finned mech injection timing cover work on a stock small block chevy without injection?
Anybody have pics of motor in his 671 blown corvette?
Does a 36 driveshaft just pull off after you remove the torque tube?
How about a 471&671 blower pic tread.
Model a on 32 frames would really be nice
Just wandering what a crager 4x2 hemi intake is worth now days,also a wilcap adaptor and muncie with hurst shifter,thanks.
Just wandering what you guys have done when channeling just a little(1/2),i have a little open space to fill some how or just leave open.Any pics
I got some problems with this qtr panel,a little wavy,dips in and bulges out alittle at seam,should i shrink patch panel,shrink disc or spot weld...
Any clue what these are?thanks
I see they have them with the steering coming out of the top and bottom,which one works the best in model a's.
how do i view pics from a old thread,they are a box with a x now and i would like to go back and look at a few pics,thanks
Need to find out for sure the stock location of steering box hole in 32 chassis,going ti drill sector hole for 56 f100 box and found out its 35...
What the drive options on old sw wings tachs,used on 392 or sbc,i dont no if they come dist drive,gen,or electic,thanks
Whats the best brake clutch assem to use on stock 30 ford fiewall(ansen style or kugels that mount completely under the dash)i like the look of...
Fitting my windshield,it gets close to closing and hangs up,you have to push closed the last inch or two,tight,should it swing freely all the way...
i have 2 coupe windshield tops(i think)and one good windshield i just came across,the tops are a little differant,the holes are the same but were...
would like to see some 30-31 coupes with visor welded on with a cloth insert,the visor sets low but to blend it in with the top it needs to be...
anybody using the stock style shim that pushes deck lid over for a good gap,i can not get a good gap,that might be the only option if they...
i dont have a pic but i have some codes off a 1960-65 6000rpm sw tach,432967 6 61,any idea what volt and cyl this is,cant find any code info other...
any way to line up the cowl to door body line,(door lower)i have looked at alot of 30-31 ford coupes and seem to be 1/8 inch differance in alot of...
30 coupe,i got the shim method for aligning the rear of the door to the body line but the body linde at the cowl and door dont line up,1/8...
30 coupe on 32 chassis,32 grille,hemi or sbc,manual,body channeled 3/4,whats the best and cheapest non aluminum radiator?maybe run a hood...
Hows the brookville filled top 32 grille shell and insert(575.00),also some on egay for (390.00),,any of these worth a shit
Separate names with a comma.