The Jalopy Journal
<TABLE border=0 cellSpacing=0 cellPadding=0 width="100%"><TBODY><TR><TD colSpan=2>This info popped up on our local hot rod site. If you're...
When did these Canadian versions of the Ford and Mercury first come out? Ended as a separate line perhaps early 60's?
I've run the 32 roadster for a long time without a spare tire. Mainly because of the lack of space in the rumble seat area. In fact, the...
Found three sticks of differing size aluminum round - 1 1/4", 1 3/4" and 2 1/4" that run 4' - 6'. No designations on alloy or hardness. Oxidized...
I need the OD of an oil filter gasket. As an example the common Fram Ph8a is just under 2 1/2". I need the next size up filter measured, but...
Am I remembering right? The yellow paint dot on a tire signifies the heavy side? Or is it a different color?
xxx
Anyone have any of these? In particular the red ones. I believe they're also listed as the "A" spring. (As compared to the "B" spring etc.)...
I hear that the dates are August 1st and 2nd, a Saturday and Sunday. Is that correct? Wondering too, if Friday, July 31 is a good day?
Got this one from a friend of mine. When he times engines with a timing light he doesn't use #1 cylinder or even the cylinder 360* down the line...
Old Wheels, New Look 　 　 Heres a little project thats gonna take a some time and effort. As well as access to a lathe and a mill....
Picked up what looks to be a wheel adaptor for a "Bling" type wheel . . . I think....:confused: Grabbed it for making a potential jig. A chunk...
I installed a top on my 32 roadster 11-12 years back. As well as had some help on getting the big flat top panel nice and tight from the...
I understand that when you overdo the CR (Compression Ratio) bit on an engine you can avoid detonation by use of higher octane gasoline - which is...
　 Prologue 　 　 Before this little story gets started, you need to know a little bit about the Rincon and maybe even a little...
Made up a new group for the community section. For all writers, old or new, fact or fiction. If you have a story, post it there. All are...
An old memory resurrected. Preferred cap guns for us were the ones that took the little wheel of caps with six shots each. If we were gonna...
41 C28, Two questions. First is the roll bar ever a problem, like bumping your head? Second how high is it from the top of the body? I'm going to...
I'm running re-pro 37-41 Ford spindles and they take the standard Ford wheel bearing size. I'm wondering if the 46 Fords use the same wheel...
Slot Mag Sizes and other Errata 　 　 　 Y’all probably know that I’m a fan of slot mags. 　 Amazing how...
Finally found a pair of 8 1/2" x 15" slot mags. ET-4's fwiw. They were polished long ago so not a prob there, but I was wondering if any of you...
Seems like, lately I’ve been having more fun than the law allows. And . . . if you figure I only bent the speed limit a little bit - 80 in...
2009 Route 66 Fun Run 　 Three days of fun, a small misadventure and a few pics. 　 　 Friday 　 Friday, ran the 25...
Is there a list of nine inch axle lengths? I know there are a lot of different lengths, 28 spline fwiw. We may have a bent axle on a guys...
This weekend, the annual Route 66 Fun Run is on. Long story, but this is the short version. Friday, went out to Hackberry to meet with some...
This piece was written by one of the members of another board. Ruger firearms fwiw, but it will be of interest to many as it was to me. Posted...
I know you guys are busy with just keeping the HAMB running, but I'm still having problems with cut & paste from WordPerfect to the HAMB. (Same...
Just thinking out loud will do it. If you've done it and popped some pics, so much the better. I was thinking about spare tires. A spare...
Sailing Down the Hill Reading Steve32's post on leaving the car show got me to thinking about last Sunday. The last couple of months...
Ok, took the 6 pages of text to Word via the clipboard from WordPerfect. Tried copy and paste from Word. Still doesn't work here on the HAMB....
Separate names with a comma.
The Jalopy Journal
