The Jalopy Journal
Good std bore 322 1939 LaSalle block with std crank and Rods and pistons. About 0.010" wear in cylinders so it will clean up easy, crank will need...
Set of 1957 "G" heads Free if you come buy something else 1956 "A" 4bbl intake with the choke mounting area smoothed somewhat $20 1950's GM 4bbl...
I have a '37 Cadillac with the stock engine and really like it so I would not mind having a hot rod with a flat Cad motor. A while ago I picked up...
A few years ago I picked up an 8BA motor and just last week I started taking it apart to see what I got. When I removed the crank I took it out...
On an engine with a cast iron block and heads with an aluminum intake and brass radiator should some type of anode be used in the radiator to...
Does anyone have a user manual for a Mac Tools ET985 dwell meter/tach/engine analyzer ? I picked up one at a swap meet and it does not have the...
I think I saw a thread that showed a tool to help adjust the float level on Holley 94 carbs. What it was is a fitting that screwed into where the...
[ATTACH] I know how an ignition system works, of course we are talking about point systems. BUT, we all know that it takes a complete circle of...
I have a T85 behind the Y block in the Model A and I need to replace the synchronizer in it. This means I will need to drop the countershaft down...
I have an older expensive welding helmet that has gotten to the point that I just cannot see to weld anymore. Seems like it just would not darken...
Two '37 Ford front backing plates, no shoes just the plates.
Just about every day I read a thread in where someone asks the poster to "click the large photo button". I was wondering, is there a way to make...
I have a Model A with a 292 and a T-85 /R11 transmission. I'm having a problem down shifting from 3rd to 2nd, the up shift into 2nd is smooth and...
Wondering if someone can help, I'm looking for some 0.030" mig welder tips that will fit my old Hobart handler welder. The tip that fits has 1/4"...
So I'm thinking about swapping in my rebuilt 292 Y block into the '30 sedan. This motor has been together for about two years now just waiting to...
Are all of the torque converters for a 1985 F150 with 302 and C6 the same? I have seen some listing pilot "nub" diameter but most do not. How...
Brand new ST235/85R16 tire mounted on an 8 lug wheel never been on road or even bolted to hub. I can remove tire from wheel if needed.
Anyone out there that can decipher Ford part numbers? I'm looking for a clutch to fit a '57 Ford T85 transmission, 11" with 10 spline. I also have...
So I have a 1946 K1 International, bought it way back in 1978. Somewhere along the line I have lost the data plate that mounts inside the left...
I just picked up a Porta-band band saw that needs a new blade, what tooth count would be good for all around cutting aluminum and steel? most of...
I'm running three 94 carbs on my Y block in the Model A but one carb is a mis-match. All three are marked 8BA in a circle on the driver's side but...
Borg Warner overdrives that is. I have a T85 with the R11 overdrive that I plan on sticking in my '30 Tudor, this will be replacing a T86 without...
As I want to stay true to a '59 build on my Model A, what shifter can I use? The transmission is a T85 with overdrive. As far as stock shifters...
Does anyone know what size and where to buy brake shoe rivets for the Wagner brakes that were used on Fords from '39 to '48? The best I can...
My Model A with a Y block has been on the road for about 8 years now and I have had two ignition coils go bad. I run a generator with output...
If I wanted to replace a bypass sock type oil filter with a new type spin on full flow filter would there be a drop in oil pressure? The plan is...
Is anyone running a Y block with three 94 Holley carbs? I just installed a set up on my 292 in my Model A and would like to get a starting point...
Well, homemade from a stock single intake.... I'm sure this was done back in the day and I don't see why it can't be done again. This is my plan,...
If you know Y blocks you most likely know the Offy 3 x 2 intake is the worst performer. well I picked up one cheap and now I must make the best of...
Like the title says, I found two early '50s F100s on some secluded state land, both are VERY bad shape but have flatheads in them. If I able to...
Separate names with a comma.
The Jalopy Journal
