The Jalopy Journal
This belongs to a friend, not a member of the Hamb. Its a set of Weber sidedrafts for the GM 6 cylinder, includes linkages, fuel rail & supply and...
Can anybody offer up a guess what these are intended for? This base is from a 3x2 primary carb, it has a single .105 hole drilled (see my plug...
I have this set of Rochesters that have 5/16 splined throttle shafts, anybody recognize where the shafts came from? [ATTACH] [ATTACH] [ATTACH]...
The door hinge bolts are 5/16ths, the countersunk head appears to be about what a 1/4" bolt would have, maybe a phillips? I need a dozen of them,...
I don't have the full story, I heard Bobby & Tyler were at Bowlin Green (they are reining Nostalgia Top Fuel Champions) and Bobby dropped the...
I thought you guys might like to see some of the cars in The Great Race, they had thier lunch break at a friends farm outside of Purcellville VA,...
Vintage Robert Shaw radiator caps with locking vent, 14-17psi, price includes shipping to lower 48. I also have the Robert Shaw cap without the...
I just read the following advice in the 1919 printing of the Dykes Engine Encyclopedia and thought I'd share it with you: "The first and most...
I love my traditional hotrods and working on them but theres nothing like a blown alcohol funny car, this is us: Here's the chassis in the shop...
I've found some very nice editions of the Eastern Drag News and I thought I'd scan and post them a few pages at a time, this is from September,...
I just heard about AlumaCoated headers and I have a valuable older set on a race car that I need to have something done to protect and keep them...
Here's a puzzle I'd like somebody to explain, I can't get this engine to run. It ran for many years and now its quit running due to ignition. It...
Heres a vintage canteen pouch, great shape, can't read the date but its old. I was going to use it to hold my regisration, insurance card and...
Anybody know of a tool to restore the Inverted Flare inside a wheel cylinder or master cylinder? Thanks, Oj
I was on another thread where an early Corvette was mentioned and I thought ya'll might like to see this one, an original Fuelie with solid lift...
This is a lightly used set of Crower 392 Hemi connecting rods, 6.950 long, I am replacing them only because I want to build the engine for AA/G...
Who makes a brass residual pressure valve for brakelines? All the ones I can find are anodized aluminum and they just won't look right. I need...
Here's one I just finished, its an all original survivor with less than 60K miles on it. A 1940 Chevrolet Special DeLuxe Sedan, loaded with...
This is a set of rochester triple two barrel, not original but modified to look original, the front carb whistles on throttle blade tip in. I...
This is a rare set of Holroyd hand machined BBC rocker studs, balls & adjuster nuts, these were a 'must-have' item for NHRA 'Stock' class race...
On a 409 motor, which carburetor is the primary, the front 4bbl or the rear?
Hemi crank pulley, 2 groove 6.5d x 3" deep Price includes shipping to lower 48 please refer to this as item# 107 Thanks, Oj
hemi crank pulley, media blasted and etching primer 2 groove, 7 5/16ths x 2 3/8deep Price includes shipping to lower 48 please refer to this as...
Hemi crankshaft hub, media blasted and etching primer 3.485od x 2.500 deep; snout ID 1.554 Price includes shipping to lower 48 please refer to...
A pair of crankshaft pulley spacers, media blasted and etching primer they are 4 9/16ths od x .1185 thick price includes shipping to lower 48...
Hemi counterweight, mediablasted and etchingprimer 5.750 x 1 9/16 deep, Chrysler hemi, fits inside some pulleys Price includes shipping to lower...
I've got a mismatch somewhere, I have a hemi flywheel that I drilled for an early Ford 11" disc & Pressure Plate - I am mating a '40ish Ford...
The Pressure plate fingers are touching the TOB when it is the 'relaxed' position, is that ok? There isn't any freeplay in the TOB. Its a 354...
I bought this Melling M50 oilpump for my 354, I decided to go with the Hot Heads 340 pump kit. The M50 requires some modification to make it fit,...
I've been trying to find a fuel filter that has 5/16 inverted flare fittings at each end, maybe 1 1/2 diameter and a couple inches long, fittings...
Separate names with a comma.
The Jalopy Journal
