The Jalopy Journal
This is a very nice pair of short (42 -48) Ford rear radius rods.These are favored by most early hot rod builders because they dissappear under...
All NOS Original Ford Script trans parts for your 39 Ford transmission. Vintage USA Made. It doesn't get any better! Prices and part #'s in last...
This is a NOS Ford script 28 Tooth cluster gear for the 39 ford transmission, part # 68-7113a. If you want to build the best 39 trans for your hot...
This is a really nice set of 33/34 pedals. Some orig. Paint left and no pitting.These could be chromed.Bushings are nice and tight.These work fine...
Here's a nice set of 40 drums and hubs.They measure .40 over on my barret brake gauge so well within spec.Some light surface rust but not scored...
Here's a nice pair of 40/41 front drums with hubs. They measure .40 over on my Barrett brake drum gauge so well within spec. ,With enough iron...
So about a year ago i pucked up a survivor 39 deluxe coupe out of long indoor storage with a bad flathead. My last five cars were flathead cars so...
Hers a very nice pair of 37 to 41 roundback spindles.They were taken off an unrestored original car so the steering arms have never been heated or...
Totally rebuilt 39 ford transmission.78 part# case,81a part # shift tower with 91a (3 inch) shift fork.OEM 28 tooth gearset that has been...
This is a very nice 33/34 rear crossmember that hS been properly removed by drilling out the rivets.No torch work or heat damage.Some original...
Hi Guys, wondering if GM made a ramshorn type exhaust manifold for the drivers side that has a rear discharge AND the generater mount boss on the...
So i'm a flathead guy and havn't worked on a sbc in about 40 years. I find myself putting together a 61' 283 for my 39 deluxe coupe.The block was...
Decent pair of 16" wire wheels.Some surface rust but no major pitting. Lug holes and valve stem holes are good,no bent spokes. $75.00 for the pair...
Aluminum adapter that mate's the early Olds and Cadillac motors to an Early Ford transmission.Great shape with all good threads and no issues at...
Here's a very nice Hollywood tag light.No dings or dents that I can see.Old chrome shines nice but there light scratches due to age.The Cad...
This is an unused rebuilt Flathead fuel pump from 3rd Generation auto.If you are Familiar with 3rd Gen. you know the dedication that Mike has to...
Appears to be complete crab distributor base for Ford Flathead. Turns freely, no cap just the distributor base. $40.00 shipped in the upper 48 states.
Nice 2 bolt timing cover for Flathead. This is for the Crab type distributor , which i also have listed seperately. $55.00 shipped in the upper 48...
Here's a vintage Hollywood tag light in excellent condition. Has patina from sitting around for years but i'm sure it would polish up very nice. I...
Here's an early Edmunds flathead in excellent condition.Has dust and dirt on it from sitting on a shelf for decades.Generator mount is perfect...
48/49 f1 column. Great condition, nice splines and turns very smooth from stop to stop.Getting harder to find.Steering wheel NOT INCLUDED but will...
Here's a very nice pair of 37-41 round back spindles just removed from the original axle. Nice threads and tie rod bores. Steering arms never...
Here's an old pair of California Custom 40-30 scoops. They would need replating for a rrstored car but have great patina for the guy that wants to...
Disassembled, has 2 badly burnt valve seats w/cracks and about a 2 inch crack in the pan rail that does not extend down the sides. I'm told it is...
This is a brand new Sealed Power/TRW flathead oil pump. I believe it to be a Melling that came re - branded in a Sealed Power box because it is...
Here's a very nice pair of 37 to 41 Ford round back spindles. Just taken off the original axle so never had the arms heated and bent.All threads...
Here's a 39 Ford "Swan"shifter that has been shortened on top by about 3 inches. It has been re threaded for a knob. The stub is good . Shown next...
Here's a pair of NOS 42 thru 48 Ford rear radius rods from an old dealers inventory. They have never seen use . They are straight with no rust ,...
Here's a large logo Stromberg 97 i recently got in a parts buy out. I'm told it has been rebuilt . It looks like it has been,all the screws are...
Really nice,not heavily pitted,no damage and bushings are reasonably tight. These have become very popular for A v/8 conversions.Asking $100.00...
Separate names with a comma.
The Jalopy Journal
