The Jalopy Journal
btt
I just got my 2 and a half inch lowering blocks in the mail from speedway and the block sitting on the leaf spring is about a qaurter inch on each...
Don't shock yourself!!!!!
How hard is a 50-53 powerglide rear end to find?
What gear ratio do you think I have now.
I've got a 50 chevy deluxe and I want to make her have a better cruising speed on the highway. Can I just swap out the gears in the rear end with...
When the drive shaft is hooked to the trans I can move it up and down.
Laying under it
I have a 50 chevy deluxe that has been chattering horribly. I replaced the clutch, flywheel, pressure plate, throwout bearing, everything. It must...
I'm trying to put together my 1950 chevy deluxe and the trany wont go into the pilot bearing. It's driving me crazy. Last time I took it apart,...
I am sure it is the timing. I have a 50 chevy with a 216 and every now and then the distributor spins. Dont give up its gotta be simple
I'm taking it apart today, but As far as I know no oil leak.
The mounts are good and yes it is an enclosed drive shaft. I'm gonna try the flywheel and hope it works. If you have more info about the bushings...
The flywheel I figured was ok because it wasn't new. I got it from my buddy who had it in his car and it was fine. Do you still think it is the...
My 50 chevrolet had a bad case of chatter ( when you let out the clutch and the car jerkes, horribly). SO I figured it was the flywheel. So I took...
Thanks, I like this photo better.
I don't remember!
Thanks for the help!
How do you change your avatar photo?
If you ever have to take out your trans then it is pretty simple. I just took mine out to install a new clutch , flywheel etc. There is a plate...
I also have a 1950 chevy. Not sure about the leakage but my trans never grinds except for first gear because it is not synchronized. Maybe if your...
Ton photos sont tres bon, merci
If you have a filter in the line it could be partially clogged. I have a 1939 9n tractor with a 4cyl flathead and it was doing the same thing....
I just bought a 1950 chevy deluxe, going to lower it and get it in some paint.
I want to change my 1950 chevy deluxe over to 12v and i know I need a 12v coil, but what else. Can I use the 6v starter, condenser, points?
The whole distributor was loose and came out of timing!!
I have a chevy deluxe I just bought and I drove it home fine but then it just died. It is getting fuel, and spark but it wont start. Could it be...
Got fuel and spark but no running engine. It keeps backfiring too. Any ideas, Im thinking timing. Inline 6
Separate names with a comma.
The Jalopy Journal
