The Jalopy Journal
Bump TTT
its a 29 roadster body taken apart. so its 4x4x3
I'm trying to find a shipper to Alaska from Chicago area. I am trying to ship a crate of body parts. Seems the Fastenal method has temporarily...
I have a 28/29 roadster body. 1/4 of it is original Henry Ford stuff that has been blasted and epoxy primered the rest is new Brookville stuff. I...
This is the only Model A Coupe with a Gen3 HEMI made to look Nostalgic is the world! 1929 Henry Ford Steel that has been sandblasted epoxy primer...
I have the stuff just wasn't sure how they went bought the body and got pieces in boxes, at least they were bagged and tagged though. Thanks.
I'm sure its on here somewhere but I am trying to figure out how the rods hook up and are secured for the interior door handles on a 1928/29 ford...
I will also trade for 9" or quick change.
I have a 1970 4 speed Toploader and Aluminum Bellhousing. It was originally in a 1970 Mustang with a small block Wide ratio Tag RUG AV 01 14 52...
SOLD!!!!!
[/ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] 1927 Ford Coupe Hotrod If you want the baddest ride don't let this one pass you...
I highly highly recommend the extruded aluminum cooler. I have used this type for racing since the late 90's it works the best and can be hidden...
I'm looking for a floats(s) for the rochester 2 jets on my 3x2 set up. I'm in the Chicago area and would hope there is someone with these in my...
Just figured out the problem....even though the kit says 78-88 GM kit only the calipers are the metric style one must use the 73-77 Gm rotors...
grinding has been done, still not the fix.
Kit # 702-4475....yes I removed the bearing and race and used the ones supplied but only the inboard bearings were in the kit Sent from my...
this has probably been answered a few times but...... I have one of those speedway disc brake conversions for 37-41 ford spindles. My spindles are...
I have a 27' Ford coupe body with the doors. The cowl is off a 28/29 truck for added leg room. it will need bottoms all the way around. $750 (no...
yep that is what I was talking about. according to the short blurb I read the guy used plates and aluminum drums off the rears, but used an old...
I briefly read a post on a google search about a guy using 82-92 camaro backing plates and drums with early chevy hubs on an early ford, front,...
Howdy, I’m ETHYL I am a 1929 extended cab pickup, but I started my life as a Fordoor Model A. I have been narrowed 2”, chopped 4” and channeled...
I have both a T-170 and a Toploader(s) My question is can I use the Toploader with the Hydraulic slave cylinder, bell housing,, clutch fork and...
thanks Hotrod, I didn't know all you had to do was switch the shaft. I'm gonna look into that.
Numbers are cool!
Its a four door model A cut down to an extended cab, fenderless and hoodless Fab work is not a problem, the whole build is a fab. No not a M/400...
Ok so I have a 390 with edelbrock intake, msd distributor and fresh heads, but I hate the width of the C6 and it needs rebuilt anyways and...
Thanks Bob, that was the answer I was looking for, "normally downward swoop." I just wanted to make sure that was normal for this type of engine.
Just a simple question, I'm mounting a 390 on a custom tube chassis but when I level the motor with the intake (degree level sitting on the carb...
Separate names with a comma.