The Jalopy Journal
Thanks for all the help and knowledge
The motor should be at 0 degrees on the plane too, correct?
Damn...thanks for help better late than never :(
Heres a question. I'm doing the same thing but did it different/wrong. I set my frame rails at 0 and the crossmember at 0. I have not done...
I changed the gaskets because I sold the car and he wanted them changed. The motor came to me already timed, turns out there were two marks on...
no vac advance, its a mallory unilite mech advance. I have always had the set screws that way and always did a good job, sort of sounds like it...
no same everything...
Okay so here it goes: I sold my car earlier in the week, stock 260 pickup crate motor with 600 edelbrock manual choke. I changed the intake...
Just out of curiosity what would cause a main bolt to break like that?
I just clicked the link from a post above, and he revised the description...stating that it isn't the original motor. Apparently hes been getting...
I don't know if its a mono leaf, sort of looks like its just the bottom leaf. Mono leafs usually have a taper, but its hard to see in the pic....
Get out the torch
I've got some shorter shocks from SoCal on the way...thanks for all the input.
Not very much, that was a thought as well, maybe a coupe inches.
Hey guys needed an outside opinion for a cause. I have a pair of chrome proshocks on the front of my T Bucket and I noticed the other day that...
Hey I found an article on it and it stats that its marketed by a german company...here is the article:...
Thanks the replies. Used a large funnel and just poured it in there, no flow problems at all. Guess I was over thinking things.
Sort of a rookie question but I need to change oil but the valve covers are baffled. My concern is that it will not flow since there is a baffle...
I used to work for the "Man in the Funny Hat" here in Lincoln. Leaving that sideways place was one of the best things I've ever done, I bet great...
Wondering what you guys out there think of Torchmate and their machines. I have been seriously considering a purchase soon as was seeing what...
Well lesson learned its better to do everything yourself. I had a buddy of mine help wire my key switch and he misread a wire that said accessory...
Got 'er all figured out and fixed....thanks for everyone that had input I appreciate the help.
Well I got it to shut off by pulling fuses and I have narrowed down to the radio/constant hot circuit on my wiring harness. Dennis D, the trans...
Well I dont think its back feeding from the alt. I unhooked the alt to see if it would still do it and it did. I ran the car long enough to get...
It is a one wire alternator...I haven't heard of those needing one too often but I'll have to try that too
I am just finishing my car and its finally ready for the street. I took it out for the first test drive and my transmission went...So I pulled it...
Here's link to the listing and lists a VIN. Looks like perfection just sitting there....
Maybe it was part of the divorce....?????
Hmm, I had something happen to me similar here in Nebraska on a car trailer that I bought. I immediately transferred title but I didn't pay the...
Separate names with a comma.
The Jalopy Journal