The Jalopy Journal
Like the Samuel Adams mount on the spring.......
Found this on a T.....dude said he wrapped the tubing around a beer can...never has had a problem......of course a T is really light.... Kenny
Use silicone spray .......petrol based products will evently dry out and clog the shaft movement ....i have fixed three tachs with...
Here is a way around the " boogers " ,years ago ( many !!) I worked at a body/ restoration shop and came across this problem a lot. What I did was...
Check with Rodney at Iron Horse Restorations in P-cola he knows the rod scene in P-cola very well..... And yes Cacks was a biker bar , I worked...
I seem to remember Sears selling trailers like that under the Allstate name.....hard for me to remember ,I was like 10 years old and my brother...
Dam.....now I am going to have to drive back home to Texas and get me some more Lone Star.......
Learned to drive in a 54 GMC log truck...6 cyl, 4 speed with a 2 speed Brownlite axle. I was 8 at the time so I learned to steer and shift the...
Did you check the fluid level with the motor running and in park?.....that is the only way that you can check the fluid level.And you add fluid...
Knife throwing.....and gunsmithing ..
IIRC that sure looks like the air cleaner that was on a buddys 62 409 SS.....
You really need to post some better pics ....and maybe better angles and you will get better responses...... Kenny
I have heard and read for a long time that flux core wire welders were POS..... well I found one that seems to do a very good job..... This is...
cool....very simple but with big results. Thanks for posting Kenny
not on any current project ,but this is on my OT DD,made it from skate board wheel,electrical tubing clamp, stainless steel bolt and spacer. Had...
Yes ,I caught this disease around 55 years ago and I have not found a cure for it yet..... Kenny
close up of my Avatar.....I stripped this helmet in the late 60's or early 70's...lost track of it ....a friend was junking out some junkers from...
xx2
This is so true! Alot of you young guys will drive down this road eventually ........Please remember this when you can't get the the old guy to...
these in my OT truck were made from weed eater pistons....ask for junk weed eater ...strip to get piston (s)....shifter had pin boss ground out...
that maybe a early Competition Engineering Logo ....IIRC, check this site... http://www.competition-engineering.com/...
If you want to build you a vertical / horizontal mill/lathe on the cheap go to this link scroll to bottom of page for PDF file......pretty cool...
First off let me say that I am not familiar with the Heath Kit tach,but from your description you are correct on the wire hookup, Red= power,...
Aussie check your PM'S Kenny
most likely the noise is from a circuit called a "vibrator circuit" it is usually a metal can that looks like a tube ,it along with a step up...
And they did a Corvette just recently........ In my pre-teens I hung around the lumber mill in my home town in east Texas hoping one of...
Also there is another way to pull a vacuum on a mold/cavity, build a "surge tank" which is noting but a metal container / tank with thick enough...
345 It was a rotary vane style pump, I borrowed it from a buddy ,the best I can remember it pulled down to like 25-27 inches of vacuum,and it did...
Well this worked for me ,I built a plywood box sealed good on all sides and bottom (wood glue and narrow crown staples to hold it together till...
.....And Merry Christmas to you !!!.....from LA (Lower Alabama) Kenny
Separate names with a comma.
The Jalopy Journal
