The Jalopy Journal
I have a Sun dizzy tester with Paramount's LED upgrade. I do not mess with flat head Ford's dizzys. So I cant be any help with that. Have you...
I loved the https://sites.google.com/site/identifyinginstrumentpanels/home/ Several years ago I messaged the site asking if they had a PDF or any...
Just last month I sent four 15x7 steel wheels, individually boxed @ 26 pounds each, from St Louis Mo to Grants Pass Organ. Fedex and UPS were...
I have realized that I have too many projects and will never get around to build the 1929 model A special coupe I have. So I am looking to put a...
I love the Hamb for all the technical Hot rod information has been shared. But I have found some others that I would like to share. First off...
This place is one of my honey holes. Don't tell any one, for your eyes only. Everyone else look away. https://www.crownclassicautoparts.com/home
The pump I used was from rock auto. Also used a carter check valve so the pump would not short the fuel back to the inlet. To make my pump...
I am in the process of installing an electric pump on one of my old cars. If it works I will doing it to my others. I wanted the pump to run...
Sound like fun. I am close to Imperial, Mo. If for any reason you need use of a garage PM me. Safe travels
I have an old Bear Dy-Namic Balancer. I have it wired and running at this point. Just need to figure out how to properly balance a drive shaft....
Welcome to Missouri
I believe that having the yoke ends clocked in the same plane is most important in keeping the shakes away. To do this I use use bubble level on...
I have one that is like the picture above. It takes a signal amplifier to work with electronic distributors.
This may be what he is talking about. I like this stuff and will never use anything else. Worth the high cost....
Boys it looks like it is time to buy your self a walking foot sewing machine. I have a Singer 111w155 that I bought cheep. In the process of...
I will dis agree with the statement that bearings are not matched bearings. You can not mix brands of bearings, meaning the use of one brand...
Thank you all for your responses. I will be giving this a try this weekend and updating this thread with the results and some pictures.
Im was wanting to apply a finish to a carburetor body that will help keep it looking some what nice looking. I have used KG gun kote (...
This might help. http://www.forabodiesonly.com/mopar/showthread.php?t=179517
I have a fuji 4 blade turbine that I bought to spray my 50's metal kitchen cabinets. I was spraying Sherman Williams enamel. To get it to lay flat...
How about drilling and taping some holes and putting some small round head screws in them. Slide the hose over the screws and hose clamp behind them.
Not mine, but found the pictures useful.
If you don't make it as a machinist, you might be qualified to be an engineer. They have half the brains of a machinist.
Thanks for the insight, Dana. I'll have to make some centering jigs. The drive shaft ends must be square and straight along with being the same...
Dan, I sent an e-mail to them. I also e-mailed Northwest sales equipment and sviinternational they did not have a manual or any info. The search...
Dirty Old Man- I hope to balance drive shafts that I cut down/make. The machine has the capabilities to balance automotive cranks or any other...
I won't be balancing tires on this machine.
Doyoulikesleds- My two small boys love helping with my projects and I love having their help. I got it opened up and took a look at what I have....
I got the 3Phase converter covered. Any one work with one of these? [ATTACH] [ATTACH]
Well I pulled the trigger and brought it home. Now to get it wired up.
Separate names with a comma.
The Jalopy Journal
