The Jalopy Journal
Thanks for the suggestions. I guess in reality I know that value is established when a sale is made. I know about what I have invested in the...
Since hot rods are so unique how does one try to arrive at a fair asking price for a hot rod? I'm just considering selling the T roadster that my...
A friend of mine swears that the grease from fried chicken is one of the most effective hand cleaners. I still question if it's really the chicken...
And I thought I was the only one watching that yellow cafe racer on e-bay. Geesh! Too far away for me anyway. V8...I'd suggest the cafe racer...
Never Die .... You have a PM
As far as the axle end of the radius rod brackets, front end or rear end, I'd just buy them unless you're REALLY good with a torch or have access...
Tornado, earthquake, tsunami, hurricane, wildfire.......does it really matter WHAT hits you? If you're in the center of the hit your stuff will be...
unclescooby.....you're right on the size of the 215 being similar to a SBC. I have a 215 Buick I probably won't end up using any time soon. I also...
I had a Rayson Craft boat that had a similar sized battery. I just went to the parts store with dimensions and looked through the books till I...
Does the driveshaft yoke slip on the tailshaft like a "regular" transmission or does it have a retaining bolt in the end so that the slip joint...
Fraz....I have the same problem here at the Lake.....EVERYTHING but Rod&Custom. I used to find it at Walmart and considering I'd rather have a...
Very unique and creative. Thinking "outside the box". Maybe nobody ever showed him the "box". I think I remember the car from a couple years...
I sold quite a few pedal assemblies, master cylinders and hyd. throwouts at my circle track shop. Regarding the bleeding part, the trick is to...
I used a C.I. Powerglide bellhousing for my bench grinder stand base.
Got this one from the HAMB.
Ellis blades are the best I've used. Price is good. They're in MN. Let me know if you want contact info.
I sent a PM to you AHotRod. I have one from a Triumph Spitfire.
If one has a "clicker" for the voltage setting and the other has "infinite" adjustability for voltage I'd choose the infinite adjustment any day....
There's lot more to go into than I'll try to here. A trial fit assembly would be in order to determine how far "down the hole" the pistons are....
Some would think it's too much trouble with the enclosed car hauler and all.....
Here's pictures of the blast cabinet I built and referred to in an earlier post to this thread. The small black hose going in the lower right hand...
I built one a few years ago. I should be at the shop tomorrow and I'll try to remember to take the camera along and get a few shots of it....
According to TCI info in one of my supplier's catalogs, the 1.82 PG input shaft is 12 5/8" and the 1.76 PG input shaft is 12 7/8". Maybe you know...
Thanks for all the replies so far. I'm almost certain it isn't the lines. They were all new braided lines. My brake light pressure switch is...
I don't know about the annealing but you may want to stop drill the crack. Just drill a small hole at the very end of the crack to relieve the...
Thanks for the feedback. You think it may have a bubble keeping the residual valve from releasing or air in a caliper building pressure from...
My roadster has a few hundred miles on it now and the brakes have worked fine till today. It has disc brakes on all 4 corners, CNC brand master...
VERY nice work. Thanks. I'll read through it a couple times.
Well, the thread seems to have taken a different tack and to continue taking it down the "wrong" road my vote would be a little T roadster by...
I have an old chromed tube axle and would like to de-chrome it. What amperage will I need to use and what length of time should I expect it to...
Separate names with a comma.
The Jalopy Journal
