The Jalopy Journal
Yep, Bubba
I'm using the old tank, grand kids like the rumble seat. As far as safety, with the tank in the back, it will go up like a Pinto.
Mine [ATTACH]
My work in progress.[ATTACH]
1954 Pontiac Chieftain Special, flathead 6 cyl, 3 speed on the column , runs, drives, stops. The master cylinder was replaced, new brake lines,...
I have a 35 four door, and I just checked, the outside part of the wheel doesn't come up tight on the drum. And I checked on the roadster that I'm...
Well, it's spacers or get rid of my wheels and buy steel ones, or get rid of my f 100 brakes and buy a 40 brake setup. Dumprat's right about the...
[ATTACH] 6.00-16 front 7.50-16 in back.
Thanks a lot for the replys, going to have to think this one out, I have 5 new tires on 35 wheels, and the f 100 brakes all rebuilt on the front.
Does anyone know if there is an adapter to use 16 inch wire wheels on f 100 hubs and drums?
Just got it on the ground, from the floor to the rear of the body it's 23 1/8 inches. Thats with the top spring replaced with an A spring, and the...
Next week I'll have the front hubs on, then I'll mount the tires and set it on the ground to get a measurement for you. It's a 30 roadster with a...
[ATTACH] The wifes 61, Jewel Blue with the white cove. Someday maybe she'll let me drive it instead of just working on it !
Yes, what you gain between the engine and firewall, you lose in the front. But I'd rather deal with that than cutting the firewall. I made one...
Yea, I have a 59 ab for it and I'm going to measure everything like lowsquire did. Then I'll make one and see if it will work. It would be nice...
I guess to get a little more room between the fire wall and engine with the stock rear and torque tube. I saw one on a build, and another for...
Yea I know, but I guess some people use them. I saw one on a build here that has one. I haven't set the engine and trans in yet to see where...
Anyone use a spacer between the torque tube and transmission to bring the engine a little further forward to clear the fire wall on an A V8 build?...
Flathead, Love the look
Right after it, my Dad joined the Navy, my Mom joined the Army Air Corp, they met in a bar in San Diego, 11 years later I showed up.:)
Happened to me on a 59 Pontiac wagon, changed it, rapped it around a pole on the way home.:(
My 30 has a T5 behind it, and with a touring cam and insert bearings. It will do 60 on the highway all day. Just don't get too close to the guy in...
Here's my 54 Poncho.
The wife and I were there today, great time, great cars, and great karoke in the lounge. It's a real fun time.
Bought from them twice, very happy both times.
The manifold is after market for a heater, I think its an autolite. No idea on the trans.
Picked up a 72 Pontiac 400 for my 54, and started to break it down today. The number 3 exhaust valve, and numbers 4 and 6 have cracks in them. The...
Here's mine, flat head 6, with 3 on the tree.
Hi all, very nice forum you have. I used to play with cars in the early 70's then got away from them till two years ago when I picked up a 30...
Separate names with a comma.