The Jalopy Journal
it has two 444C compressors and it also has Nitrogen, so I don't have to rely only on the battery and the air compressors. With electric windows...
Probably already in the posting someplace but the 60's was pretty simple so I would go with... Drumyn's Hot Rods, or something like Drumyn's Rod Shop
Home built, two viar 444's, there's an 8 gallon tank behind the rear panel, five gallon on the side with Nitrogen 8 1/2 inch valves, 1/2 inch...
here's mine [ATTACH]
this 67 was mine, bought it stock white in '76 and built it in my garage. did everything except the seats and pinstripes myself. Sold it in 82 or...
2 1/4 inch with flowmasters, sounds awesome, n my car lays frame.
best replacements parts around, www.truckandcarshop.com there located in southern California and have on-line catalogs, mail order or walk in...
I use them anytime I need parts, they are always very helpful and go out of there way to make sure I have parts without any issues, damage or...
all thread and nuts, just weld them on, grind off the excess.
Skinny,
I added another set of wires from the window motor to a switch located outside the car, then I roll the windows down and use the inside handles to...
This is the most accurate response. Grade 5 will be fine. There are hundreds of fastener manufacturers in this county, I run one of them,...
Saw this on Craigslist OC,"spray booth rental available please call 714 264-8965" I don't know them, but I like to keep track of where I can...
May or may not be something your interested in but the Las Vegas super show is on the 10th @ Cashman
Remote controlled power windows, then I just use the inside handles
There not played out, There like a pretty woman's dress, looks great when it's laying on the floor:D Here's mine
Smaller bags will require more pressure to lift the car, but i don't think you will notice much difference in ride, may actually be a little less...
Well it shows up when I search it at autozone (but to be honest, I checked 64 not 65). But here's Rancho Riviera, (AKA Mr Riviera) Larry. he could...
Oh and I look it up to, Autozone has them.
Autozone, pepboys, Rielly's Funny huh. I get all my parts from autozone at about 1/3 what the "specialty" shops charge. Brake pads, wheel...
Everybody loves a nice Rivi, the more you drive it, the better you'll like having one. Anybody that has ever had a nice one, always comes back...
I have reversed wire wheels, they are 14 x 7's and pleanty of room. I lay on the frame and have about 3/4 inch between my tires and my wheel...
it turns good, handles well, drives straight, no pull, single finger steering effort from 0 all the way to 80 mph, no shakes, no shimmys, no...
Three tips, www.oldbuickparts.com Check for parts at autozone, I'm amazed at the machanical parts they have been able to get me at 1/2 what they...
the plastic ones are molded on and the metal ones have a press fit snap lockring in them sometimes you can pry them off, but you got to be...
I have a 64 impala that is making me nuts and hope someone on here can help me figure this out. I have a really bad shimmy/ shake in the front end...
Looks good from here, Stock, slammed, dropped, don't matter Rivi's are just bad ass.:D
Thanks for all of the positive comments, I've been lurking around here for a long time. lots of good info on here.
I used EZ on my 40 buick, it should be called "really ez" instead of just ez LOL
Thanks, the suicide doors came that way from the factory.:D
Separate names with a comma.
The Jalopy Journal
