The Jalopy Journal
Try the EMS website they may have a diagram and/or stampings. The Wescott website had a drawing of the frame dimensions as well as the body...
Sorry for the delay. On my 36 measuring the A pillar below the dash inside at the tack strip at the beltline=43 1/4" B pillar inside tack strip...
My 36 5W is in storage at the moment, I will try to get the measurement today and post later.
Best to PM me on this, don't want to hijack the thread.
When I did my 40, I used an 8'' ford Granada rear and spring pack with shortened top spring and REVERSED EYES centered in the opening. I also...
sound like a possibility, do have a picture to look at, it may be a possibility? What locks it in place on the opposite side of the hinge? I...
Thanks for the info, your top must have been chore. You are correct side panels stationary and removable. going to mock up the cowl side hinges...
My 36 was a rumble seat 5W coupe, the seat back/deck lid had the drain trough cut out by the factory at the back of the opening, this allows...
Thought about this as well after looking at the wifes O/T Taurus, an option for sure if the slots can be made to look "natural". Thanks.
Thanks for the idea, but I want full access to the engine compartment. I have 2 exta sets of taillight stands, but not sure how you can contact me.
All great ideas, I do not want to flip to the side since you will not be able to get at that side of the engine to service or work on it. The...
The 37 Ford hood is different and I have mocked up 37 hinges to the side of the cowl. Looks like there is not enough clearance for the 37 pivot...
Hi all, been lurking for a sometime while working on my 36 5 window. Has anyone welded up the hood and used a firewall hinge to open the hood...
Separate names with a comma.
The Jalopy Journal