The Jalopy Journal
18 gauge mild steel u-bends for sale. EACH BEND IS $10 other than the 4 in the background they are $20 each. 2" OD bend 180 degree 12" on center...
I was thinking of using an old valve spring or make one of those Star looking 1/4 thick washers that have a raised center??? What seems to be the...
My question for you guys who are running this type set ups is....I have sleeved my front frame rails and am thinking of mounting the friction...
UPDATE.....got a hold of Randy through e-mail and have one on order should have in alittle over a week. Thanks guys for the info
Gotcha....well I guess I'll just wait and see if I get an answer from him. thanks a lot for all the info. Tony P.S. did he happen to give you...
Thanks Phil1934 I'll try that route....did you end up with a scoop, it so how was his turn around and pricing. Thanks Tony
Has anyone been able to contact "Randy" aka "GASSERGLASS" aka "GoFastGlass.com" aka "TheGlassShop.com". Looking to have him make a scoop with no...
Thanks guys for all the info....heads are something I would love to say I have the money for and in the future I will definatly purchase a set. I...
I definatly don't want to spend the extra money......
Thanks guys for all the info and diffrent points of view I do always appreciate the help. Especially on something I know very little about. What...
Thanks Cryobug.......that's what exactly I did. Holley came up with one of their blower type carbs, MINIMUM 750 double pumper they said and one...
Thanks Dueces.......you think the 750 is too much carb for that small motor and head combo? Tony
Ok guys I came across a old B&M blower for basically free. I sent it to B&M to go through hone/reteflon/seals and bearings. I know NOTHING about...
Yes it has the teflon on the edges and there is no gouges on the rotors. The bearings in the end cap are usable but the seal and that spring...
damn nobody.......ok how about another forum that might have some info???? Anyone know of one???? Tony
I came a across a older B&M 144 supercharger from a freind for a few hundred bucks that I'm thinking about buying. It spins perfect with no hang...
Thank you very much for the info, I did come across some posts of guys who did exactly what your taking about; (Lengthing the steering shaft) One...
it's going on a 38 international D-2 Pickup
sorry about that....good question though....ment steering box
Quick question guys...looking at buying a flaming river steering (((BOX))) from my buddy. He purchased it from Summit and says he THINKS it will...
Bad ass cars guys...thanks again for setting my mind in stone with my choices on those hurst tire sizes. Tony
Nobody has a pic of their car with this set up??? I know there is a ton of pics with the smaller slick, but I havn't seen any of the new ones...
Ok I'm at the point where I'm wanting to order my tires from hurst 31x10x15(cheaters) on the back and 26.5x15(super cushions) on the front....
Thanks for the info!
Dirtbag13, I like the way your radius arms turned out, very nice. What spacing and hole size did you drill? Thanks Tqz
Second that one on Morrison Auto Machine. Talk to Doug, they have a guy up in NW Phoenix that does, wheels, hubs and drum machining. Their guy...
Do a search for "how to build a early hotrod frame" it's by brianangas...VERY GOOD READING it might answer a lot of questions your going to have....
new info is never ending on this forum.....Thanks John
yep....more pressure worked(got everything out and crushed). The only thing pitted is the outer 1/8 the rest of the the cylinder I can hone. The...
Damn, just called carquest....$76 each...I know there are some guys on here who have paid more like $40 each. I think from napa. Just thought I...
Separate names with a comma.
The Jalopy Journal
