The Jalopy Journal
Thanks for the info, I'm having a difficult time finding the complete sets. I'm sure I'll stumble across them.
Plan on swapping my '62 from the 6 to a sbf/c4 combo this winter. Have a few questions though: What mounts will work in the '62 chassis? Also...
Some sites say 49-52 others say 50-52.
Up top...anyone?
...anyone know if the 50/51/52 Plymouth skirts will fit? I've heard '49 is a one year skirt, but I've also heard the 50/51/52's will fit.
This is my year round daily...283, 10.5:1, solid lifter cam, Muncie m21 4 speed, electric wipers, power brakes, and heat. Also my only vehicle....
Well I'm not entirely sure what the issue was, fuel pressure wasn't it though. Traded some parts for another new 600 Holley and all is well. I...
I've had both of the Holleys apart several times, every things clean/new. I've set the floats on both to no avail. I ran to the parts store and...
2 port fuel pump, its on a 267 Chevy, have a filter coming off the tank as well as the filter in the quadrajet. Tanks clean and I ran new lines...
Trying to determine my issue here...I'm running a stock mechanical pump so no regulator. I've tried 2 different Holley 600 cfm carbs (on...
Yeah, I had checked rock auto also. I found everything I need on summits site extremely cheap, thanks for the quick response!
Being 4.75 it would have to be a g10 series van correct?
Need to order wheel cylinders/shoes/hardware kits...any ideas what this is from? 5x4.75 small Chevy bolt pattern. [IMG] [IMG] [IMG]
They are temporary, pretty much just using the flanges and first 2 inches of primary pipe to eventually make a set.
Got the engine fired last night, started some body work today, also flipped the front axle back under the leafs. (previous owner had flipped it)...
The sprint car headers are coming off, they came with the truck just used them to fire the engine.
I have it planned out, I'm just interested in seeing photos of other trucks. Tell me none of you have looked at vehicles similar to yours?
I was waiting for that haha, either way just looking for some photos.
Sorry for the terminology mistake, altereds then.
Picked up a 46 chevy open fender truck. Rather than chop and channel it I'm debating on going the gasser route. Can't seem to find any photos....
Believed to be Keystone Rebel's, looking like mid sixties. Btw I own the truck.
ASL? J/k.... but seriously.
Trying to source parts for this, actually only thing I'm looking for is rear cups/brackets and front plates/cups. I've been searching to no...
I'm gonna try and make it out with the '29 essex and '37 ford.
Hate to bring a post back from the dead, but heres my 55 getting ready for paint. [IMG] [IMG] [IMG] [IMG]
Separate names with a comma.
The Jalopy Journal