The Jalopy Journal
THANKS everyone, i'm going to try it this is what its on 31 chevy pickup 270 GMC. Jay D.
i'm doing a draw through turbo on a 302 gmc six, the configuration more less makes me mount the 600 Edelbrock carb back wards. has anyone done...
THANKS!!! thats exacly what we are planning to do, Heim joints. Jay D.
my boy and i are finally getting ready to change his trans 52 stock GMC we have an all synchro 3spd. so when we pull the stock 3 spd out, will...
NICE JOB! on the floor boards. i'm just trying to lay mine out today. Jay D.
I have a large port head that should help, although its just a hot street cruiser not a dragster. Jay D.
AWESOME!!!!!!! Jay D.
this has been suggested what do you think??? T-4 GT3582 Specification: Compressor wheel: 65.7/82.6/85.3mm Compressor Housing: 0.72 A/R Anti-Surge,...
Marcus thanks i'll try ad answer some questions hers what i would like to do not necessarily have to do. i would like to go draw through as it...
[ATTACH] [ATTACH] thanks Marcus its a 302 GMC INLINE SIX i'm thinking 4-6psi boost starting around 2000rpms max rpms is going to be below 5000...
I'm putting a 302 gmc in my 31 chevy pickup project and want to put a turbo on it. can anyone help with what size i should look for? its just...
I'm putting a 302 GMC in my 31 chevy pickup project. does anyone have an idea what size turbo i should look for? thinking about a draw through...
Thanks for all the good ideas and reply's! I really don't know what i'm talking about. i'm just trying to figure out whats going to happen if its...
YEP, we tried a couple different designs, but non worked vary good. we tried a bent tube to run the cable through and pull the throttle lever back...
this get confusing. but on the VW the throttle cable ( YOUR facing towards the front of the car) is to the left of the carb so with the carb...
its for my boys hot rod VW bug with it mounted in the rear its going to be backwards on acceleration. word is that it will continue to accelerate...
i'm not sure i'm in the right place to ask this. i have a particular application for a Edelbrock Performer 4 barrel carb that requires it to be...
received my 6" lowered tube axle from Speedway a couple days ago. so yesterday i went to fit it to the springs to see how the width is going to...
I had a local Sheetmetal shop bend me up a couple for my 31 chevy Jay D.
1971BB427 Were in Oregon are you. i'm in Coos Bay.
AmishMike, Thats my plan get the plates on as close as i can and tack. then put put it all together and then a final check and weld. THANKS Jay D.
YEP, its from Speedway, but it has spindles on it. a trailer wouldn't handle very good with it . Jay D.
Another question, should i have the wheels and tires on. its going to be suspension wise about an 1 1/2 lower in the front then i'm going to be a...
yes its castor i'm talking about. Jay D.
just got my Speedway 6"droped tube axle. for my 31 chevy pickup. it comes with no spring pads welded on. what i'm wondering is what degree of...
heres a couple shots of mine these are 195/15s[ATTACH] [ATTACH]
yep probably the same one i got from Speedway. puts the wheels out to far. Sids will sell a narrowed dropped axle, i think thats what's needed....
just like you i'm working on a 31 pickup. you said something about disk brakes? i have a 52 front axle and can't get a disk brake kit or parts to...
what is this scrub radius you talk about and how is it going to affect me? I'm seriously thinking of narrowing the axle, 2" would really help. i'm...
I have a 31 chevy pickup WITH a 52 chevy pickup front axle. i bought some various disk brake parts BUT now haveing trouble getting them to work...
Separate names with a comma.
The Jalopy Journal
