The Jalopy Journal
thanks for the reply, will check with United Pacific and look at 34 handle option, but I think I looked at this and didnt like the "curvy" look of...
Hi, I have a 1932 pickup ford with original door levers and system. what is the best way to convert the driver door opening system to be lockable...
wbrw32.... I'm listening and considering everyone experience, I am just using other people advice to try to fix my problem... so if you don't...
after it stop we removed the air filter and checked both carb, gas was getting to both carb, sparks plugs had sparks, plugs wasnt soaked and...
No, I am not ignoring any advice and use everybody experiences as a great source of info. I just had my distributor rebuilt 3 weeks ago, all...
As I said, I don't run mechanic fuel pump and don't have condenser. I'm thinking to get a set of phenolic spacer, did anyone had good experience...
Its a 46 engine on a 32 pick up. Running no hood, just the grill.
no condenser, electric pump only/
I have a 1946 flathead ford, new head gasket, pertronix converted distributor, eddy Meyer intake with 2 stromberg (back carb has a 1" aluminum...
This happen to me a lot. I use to keep cracking distributor cap or blow coil. Both cause the same problem, run bad until it die, restart when cold...
I have a 1946 flathead with pertronix ignition and coil. My coil started leaking so I changed it for a new one. since then my ignition switch...
Ill make some test and get back to you. Thanx for all the tips...
I have aluminum top hoses. My radiator was custom made by a good radiator shop, not on a cheap side at all. had it checked yesterday by a old...
it run around 175/180 when not going hard with fan on (town or highway), as soon as I look water it goes up to 200.
did a test for exhaust gasses, all looks good. Have no water leak in the head gasket either... If I rev hard in parking nothing happen, it is just...
I have a 1946 flathead, 21" tall radiator, high flow water pump from speedway. when I drive it under hard acceleration the water is pouring from...
GMC BUBBA, I have a PerTronix 40011 Flame-Thrower 40,000 Volt 1.5 ohm Coil, as requested on the pertronix doc.... it is brand new....
So, I have some update on my problem. I added 180degrees thermostat, was running a bit cooler. check for crack or leaks, nothing, all seems good....
what the problem with air filter? I was thinking to remove them tho, I have those:...
regarding miss firing, it only happened last week end, never had the problem before, did 150 miles in a really strong heat the week end before, it...
update: Removed top hose and fan belt and had no bubble when running. Radiator is new, in brass, 20" tall, 4 cores. I will fit 180 degrees...
I have a 1946 flathead, High flow water pump, 2x2 intake with 2 strombergs. new radiator with 1240CFM electric fan, mix of water with 2 bottle of...
I stopped by the shop last summer when I was on road trip in California. Had a great day visiting the shop, looking at all the project they were...
Does anybody knows what is the paint code for this car???
Need inspiration for the inside bed on my 1932 pick up.... Post pictures of yours...
SimonSez; I Spoke with the guy 3 years ago at the donuts derelict, if I remember he said that they was Bonneville Halibrand wheels. By the...
The 33 pickup should be finish in a couple of month... I will write the full story with picts then....
Roger Miret's from the rumblers NY brand is Dirty Devil, better design than this Lucky Devil...
cool, thanx I will contact them. Is it hard to modify or an easy job to do???
Cool, if anyone have is contact that would be great.....
Separate names with a comma.
The Jalopy Journal
