The Jalopy Journal
I don't know if this is helpful, but: The stock switch seems to have an internal thermal static relay. When it gets too hot (current overdraw)...
If you still have the radios; maybe they put their business sticker on them. don
Many thanks for the great advice and experiences. I think I know what I will do (special incoming account at bank). This seems safe and easy. I'm...
I have read about incidents where sellers of vehicles got scammed (nefarious payments and subsequently losing their vehicle without recourse)....
It's a bummer, but as everyone commented, the good part is that no one was hurt. It sounds like you are a really good neighbor, but a suggestion...
I'm just relating my experience for your information, I don't know enough to have a valid opinion on this, but it is significant to me because I...
Anderson: what filament and printer did you use. Thanks donsz
I use Fusion 360, at this time, primarily for a Jeep accessory I designed. I started out with Blender (initially for some 3D graphic work), but...
This probably isn't your problem, but I'm putting out there as something to consider if you don't solve your issue. I had a similar release...
1. As suggested, buying the clock is a good value for your purpose 2. If you still want to replace the needles, find somebody with a 3D printer....
You could just put a "momentary" contact switch on the dash to replicate the points grounding function. Or, you could wire a "six speed"...
I use Chrome as my main browser. I have Malwarebytes (the free version) as my anti-virus. I also installed Malwarebytes Browser Guard as an...
You can do it yourself with a pre-cut wood bed kit : wood and metal strips. I did it and it worked out fine. One place to look is:...
I use my computer for a lot of things and find it to be invaluable. However, I still like to read newspapers and auto enthusiast magazines (I...
Sorry didn't read your post closely enough. I used the Newport Engineering electric replacement on my 1957 Chevy pickup (2 speed). Has worked fine...
Or this: https://www.classicparts.com/1958-62-Fuel-Pump-6-Cylinder/productinfo/82-213/ don
My 1957 Chevy pickup has a later 3 speed OD (1st gear synchro) trans. I enquired with Hurst as to my options, this is their response (I wanted a...
You can right click on an image on their website (page you opt to visit) and select: - "Search image with Google" - On the right-top, on the...
I hope this is OK to post, I don't want violate any rules, I understand if this post is deleted. This is NOT a sales pitch; it is a request to...
I had a 235 in my 1957 Chevy pickup for a while. It is a great engine, seems like they start and run regardless of malady. Then I put a 261 in...
You can do some research here: https://www.stovebolt.com/ubbthreads/ don
If you have an interest, attached is an article that describes how to wire a splitter for six speed operation. I did do this, also attached is the...
As far as I know it is compatible with a 235: (see https://www.stovebolt.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=1041888) and...
Here is mine, on my 1957 pickup: cut up an exhaust pipe, welded it to the dash, and mounted a tach inside. Chrome bezel is from a metal travel...
I know you are put off by the looks of the Langdon carbs, but just FYI, I used them on my 261 and they worked great and reliably. don
Lots of good opinions here. Why don't you go to: https://inlinersinternational.org/ https://www.stovebolt.com/ join them, poke around, and view...
1. I didn't find rebuilding the stock box to be difficult. 2. If you don't feel comfortable rebuilding it, you can buy a rebuilt steering box. But...
When I had a 261 in my truck I used the Langdon HEI (http://www.langdonsstovebolt.com/store/#!/Ignition-Systems/c/18665949). Worked great, one of...
If you haven't already researched it, there are conversion kits available: e.g,...
I have taken my 1957 NAPCO truck to few local shows. It is a driver, but people seem to be reasonably impressed by it. It sits high and has a 348...
Separate names with a comma.
The Jalopy Journal
