The Jalopy Journal
Great stuff, I guess it is under the dash. As for the distance, it is still only 3 feet or so, that should be allright.......Thanks
I am running wires on my roadster and am wondering where I should locate the relays. I will use relays for headlights, horn and radiator fan........
Have not seen your Whippet before ! Good to see another one.
Hey guys, I am starting to run a few wires on my Willys. Planning to build up the wiring myself, but I have questions. Most important right now is...
Thank you all, I have enough to get busy!
Got my master cylinder (M/C) - pedal assy installed on my '29 Willys. Now am looking at what lines I need and if I need a proportioning valve....
Thanks guys! I will proceed !
Hey guys, I am about out of usable room on my '29 Willys roadster build. Wanted to use a booster unit on the brakes but just cant find the extra...
Just started the search for a trans oil cooler for my'29. Ran across a cooler that I have never seen, a round , finned aluminum cylinder. Much...
Good info, Thanks!
I am looking at a frame mount brake booster and duel chamber master cylinder, from Speedway, for my '29 Willys, but have not yet decided on the...
Thank you !
Anyone know what the correct diameter of Ford C4 transmission coolant lines is ??? Ready to plumb my C4 in the roadster, but don't know what size...
Dont have a lathe handy. These drums came off something, just need to know what...
The back plate to backplate is 49 1/2", stillrunners
Have a Lincoln, Merc, ford 8 inch rear end under my '29 Willys. When I bought it, was told it was a '70,s Maverick, Year unknown. Ok, want to...
I know you are suppost to use NEW flywheel bolts each tome you reinstall a flywheel. But the so called replacements called out for my 73 Mustang...
I thought that for a while, but it is just too thin to fill it and try to redrill and flatten it. This particular valve body does not use any...
I am going to agree with Mike51Merc, as to the hard to find part and I have decided that since I can change it without a trans pull, at a later...
My kit is from Summit and is for a 67-69, so I gotts assume it is correct. The hole that is in it is def a drilled hole. It is in the correct...
First off, I have no history on this C4 trans, got it from a donor car, never seen it perform.....I am putting a TCI Pro Super rebuild kit in it (...
I appreciate all the info! You guys are a great source of info!
Have moved up to the front end of my Whippet/ Ford Hybred, while I get some machine work done on the engine. Pulled the front wheels and am seeing...
Will hang the strings and get the numbers ! Thanks everyone. I have the brackets made and clamped to the frame with the engine weight on it. Just...
Guys, I am putting a 72 Mustang 302 in my '29 Whippet frame. Am building the mount brackets and need to know what the center to center (left side...
I am mocking up the engine in my roadster and am wondering what the distance should be between the fan and the radiator. I have it at about 2 1/2...
Yep, that was here in Fort Worth. Even worse, they are going to bury it nose first, with the rear sticking straight up, like the Caddy Ranch,...
I just put a new set of overload coil over shocks on my 29 Whippet. Bought them off Ebay for $70.00 + shipping.
I am going to try to put a before and after pic on here. Pretty much have finished the new rear frame section on my '29 Whippet.
That looks great ! There used to be a metal sleeve that you could buy at the auto parts store, that went on the snout. Thin enough that it didnt...
Separate names with a comma.
The Jalopy Journal
