The Jalopy Journal
Found it, this should have all of the information you need....
Also there was a super in depth thread by a member probably within the last year doing a front to back installation using his own products and...
I don't see how the Zephyr style brakes wouldn't work or how bendix style are any wider than the original drums. The math isn't mathing here....
They never went away, these engines have been hopped up over and over well before I started showing interest in them way back in 2002. It’s just...
Exhaust open, intake open, exhaust close, intake close.
The math has been done, the amount of amperage needed to make it useful will meltdown most automotive electrical systems. It’s only good for...
If the brakes work now leave them alone. The probability of another thread asking why you can’t get a firm pedal after the “upgrades” is high...
With all of the other things you have planned and have already done you might as well go with later spindles that already have what you need....
Nothing. Maybe a start up here and there just to hear it run.
Speedway 9Super7s are trash, there are tons of threads about their issues here, but buying 8 brand new genuine Strombergs would definitely embody...
Seems to be asking a lot of those lower shock mounts, are they going to be changed out for something more suited for holding the weight of the...
I remember reading an article in Lowrider Magazine years upon years ago in middle school about how dipping a bare block in chrome could indeed...
You have a front drum mocked up. Front hubs with tapered roller bearings will not fit on the rear axles, which is what it looks like you're doing...
Never had any inspections done in CA or CO aside from initially having the VIN verified to obtain a title.
Have a vision and stick to it, know what you want the final version to look like and do what it necessary to get there. When you start making...
Permatex Right Stuff, forget the gasket.
That thing probably sounds like an ocarina driving down the road with all of those holes in it. I had a bullet hole in the cab corner above the...
Someone will buy it, should bring about 100 - 200 without the bracket. I would compare with similar ones that have sold and see what they got. My...
It’s a mechanical tach drive, pretty desirable to some people. They are not reproduced and it appears you’re missing the brace that keeps it from...
The transmission in your car will not fit the early style integral bellhousing. If you really want to use the French block you will need to track...
Well good luck I guess.
The axle is too long or the bearing is not pressed all of the way on. If the axle is too long it will bump into the spider gear cross pin and...
This is easy enough to figure out, the spring you will need is dependent on the space between the perch eyes on the ends of the axle tubes. Get...
Well I would bet that the previous buyers were high on dreams but low on ability. With all of the hacked up sections and missing subrails, they...
Wires need the trim rings.[ATTACH]
They may be the same exact part but the center sections are different between the model years.
I'm honestly surprised that this one doesn't get more love, there are hardly ANY pics of it online. This was my favorite to watch come together...
Looks like I will need to do the same now.
Probably why the views are so high, we can only handle so many overheating SBC and my brakes don't work threads.
I had this issue, the fuel pump was starting to fail, would be fine at start up and taper off while driving. Let it rest a bit and it would work...
Separate names with a comma.
The Jalopy Journal
