The Jalopy Journal
Working my way around the wheel well and lower front quarter. [ATTACH][ATTACH]
More pictures of work. [ATTACH][ATTACH][ATTACH]
Thanks. Pictures would be great. I'm a visual person.
Thanks. It'll be a pain in the ass no matter what. Now if I can find someone to post pictures of split bones on 42-48 ford chassis.
The rain gutter is missing completely on the passenger side. Driver side about 6 inches. The bad part is that it is sandwiched between the roof...
Squablow, any help on how to make the roof rails?
Trust me Squablow, it's not getting discarded. I need to find a good frame with paperwork. The black car was a failed no title project. I just...
The sanded body is my original car I started with(sedan to coupe).
Had to make a trunk for the black car and it needs some rocker work but the floors were surprisingly very solid. The wheel wells need some work...
Well... it's been a long time. I switched some things up over the last year and half. I bought another body but did not give up on the original...
Still out of time.
It would help to know what year the motor is. Most 5.0's after 87 were all roller cam HO including the ones in pickups. As mentioned above, some...
Thanks for the clarification Gimpyshotrods. Your input is much appreciated.
The S10 trans shares the ford tranny to bell bolt pattern if I remember correctly but other than that and some internal pieces that are shared...
I did the clutch fork conversion in a T5 bellhousing with a fulcrum spacer and original fulcrum and clutch release lever. Seeing how you have a...
Done this already. Get a trans mount from modern driveline, An 86-93 V8 Mustang t5, the 5 bolt bell to T5 adapter. The S10 tail conversion is...
Made a little more headway. I made a master cylinder cover for the floor with a removable plate to add brake fluid if I have to. It's not...
And.....pay no attention to the "scrap metal" shelves in the background :)
It's turning out pretty good Squablow. I had to narrow it almost 5 inches and then extend the drivers side a little to center the steering...
More dash work done. Almost time for some filler and paint. [ATTACH][ATTACH][ATTACH] Sent from my SM-N975U using The H.A.M.B. mobile app
Thanks FrozenMerc.
So...what crank would that be? An offset ground 390 one? Sorry for sounding stupid but I'd like to know what the combination was to get 402....
I love the ford explorer front water pump setup. It is actually really short. I run the serpentine belt but you have to go with what's available...
Ok... need some help again. While trying to figure out my gutted doors on the business coupe it seems it didn't have a division bar between the...
Does anyone have measurements or a template for short for windows glass? I want to cut my own butt my doors came without glass. Thanks. A...
Throttle stuck on a 69 firebird and up the trailer it went and out over the front and into the bed of the pickup. So....we ended up with a...
No different than putting a SBC in a FORD and still saying you have a FORD. I'm with Anthony myrick on this one. There are a lot of things that...
Hey Rustyl, do you have any drawings of 42-48 fat fendered fords and 55 ford cars. Love the sitting in the weeds ones.
66GMC....Love that t coupe.
Are they still available?
Separate names with a comma.
The Jalopy Journal
