The Jalopy Journal
you can put on a higher psi radiator cap which will help raise temp and lower the boiling point. there is alot of people that wish they had this...
im there lets get this party started. early 35 truck
have a problem trying to find out if 2 ton body panels interchange with half ton trucks? so i thought i would consult with the experts. I have a...
machine shop confirmed that i had a cracked head on the number six cylinder. the crack was between the valves causing me to have to much preasure...
i purchased a hobart about 3 years ago which is made by miller and if ever needs serviced miller does it. i have never had a problem with mine and...
okay so i have gone up to a 22lbs rad cap and thought problem was fixed. wrong!!! so tonight put a pressure tester on rad. pumped it up to 22 lbs...
does the recovery tank need to be presurized for fluid to be sucked back into rad. ?
very nice good luck with your build
so tonight i checked radiator cap for fitment. all good there but bought a new rad. cap 22lbs and installed. toped off rad. and drove yes i lost...
wasnt aware of that one but ill check it out thanks
yes i do and it will hold about a quart or alittle more
does this sound right?
its a down flow radiator and it will push out about half a gallon. the rad. size is 24"x30"
yes I had put one in just to avoid a problem. thanks though
i have a 34 dodge truck with a 350 small block mild cam. problem motor does not over heat but pushes coolant out of over flow tank only at higher...
im building a 34 dodge 1/2 ton truck with a 350 motor and a muncie four speed. I have already installed an ifs kit along with boxing the frame to...
i know this is a little late but i have a early 35 1/2ton and my friend has a late 34 1 1/2 ton and NO THE CABS ARE NOT THE SAME the 1 1/2 ton is...
it is very important to brace the car to keep it from racking. before doing any thing make sure the car is sqaure and if not get it squared. then...
so is it safe to put an extender on one side? if so that will fix the problem
very very helpful thank you. one other question i purchased a ifs front end from s.h. in cal. and had many problems. i have solved all but one it...
thanks for the info. what is it about heim joint that you dont like?
i was looking for some genral info on building a triangulated four link for my truck. some questions i had were; is there any angles i need to be...
Separate names with a comma.
The Jalopy Journal