The Jalopy Journal
[ATTACH] This should be the one for the arrow switch
Check to make sure you have full voltage to the coil could still be wired through the resistor dropping the voltage in the run side of the switch....
That appears to be a RC50 Sun Tach which requires a EB9A transmitter. If you google RC50 you will find the wiring diagram with the transmitter....
I need to get some of those files in the correct categories. That article is actually under frames I think on the third page. If you open the link...
Here is a link to a tech article on my website that may help it is a docx document so it needs opened in Word or what ever you have to read a...
Been a long time since I rebuilt a Dynaflow but the sequence is remove torque convertor, bell housing, oil pan, valve body, reaction flange and...
Good point although I would think unlikely I played it safe. The fan assembly I used is brush less and the starting capacitor is separate. I...
I installed a momentary switch at the door. The door opens fan goes off, door closes fan turns on. I open the door slow so the fan comes to a stop...
So my new shop is in a perfect location with great neighbors but is way to small for a permanent paint booth. I searched the internet for ideas...
I worked at new car dealerships in parts, service and body for twenty five years. I could write a book on the things I have seen go down. This is...
I worked as a Parts/Service Director at a new car dealership for 20 years. I bought a house (and paid it off) raised my 3 kids. Three months...
Welcome from Loveland,CO
Martin Senour FS510 (black) FS512 (gray) FS514 (white) sealer will seal it so you can paint it with enamels or urethane's but not lacquer. You...
Welcome from the Colorado Rockies.
Here are a few pictures I have kept. The kit I have no idea who made it. I used the pictures to build one similar. The other pic was on Jalopy...
Here is a link to a Holley Tech Bulletin on power valves. http://fasthotrods.com/index.php/technical-information/doc_download/38-powervalves
I own a really great tool to pin point noise and vibration it costs around a 100 dollars. I had one that I used at a GM dealership that cost a lot...
As professional painter I have to say that is very poor workmanship. All of the raised and cracking areas happen when a acrylic one part glazing...
Could not have said it better. I see so much stuff roll through my shop where people re-engineer stuff that fails. Yes there are things that were...
I like the cars hanging from the roof rafters. Great for the pigeons hard on the cars.
My son got his first kidney transplant at age 7 and his second 3 years ago at age 25, he is one of the best parts counter guys in the business. He...
When I was 15 I was building my first car a 1957 Fairlane 500. I needed some parts, a guy in town used to race stock cars with 57 Fords. I went to...
Ruglyde cheap and made to mount tires, leaves a nice clean tire with no residue when your done Napa #765-1338 about 12.00 a gallon.
Welcome from Loveland
This adapter on Ebay should work for you...
I ran 10" wheels w/5-5.50" back space on the rear. I no longer run this combo but it worked fine. I only have it setting 2 inches below stock...
Use non chlorinate brake clean 2 cans will do a great job. Then use a Napa product called open gear lube part #1366 spray all the dry bearings it...
"Hey has anyone seen my english wheel?"
You are correct those are Oldsmobile Rocket carb logs
Separate names with a comma.
The Jalopy Journal
