The Jalopy Journal
i have 1950 flathead with stock dist with an ignitor instead of points can i use manifold vackum to the advance the 97s have no vacum ports
Where Where do you order them
i have a 8ba flatty with a stock dist with a petronics ignitor i want to use a pair of speedway 97 carbs they have no vacum porys for the spark...
I blocked off rear carb it runs fine now
its a 8ba engine 1950, stock ign,sharp two carb intake mech fuel pump and holley 94 carbs.
I have been fighting with my carbs the engine runs great although it has poor throttle response it stumbles when you give a little gas. I am...
my 8ba has 40 at idle cold 5 at idle hot and 60 on road cold and 25 on road hot
changed the caster it is 100% better
I have been doing some test runs on my a-v8 it steers fine although on a good road it wants to wander and the steering is real sensitive meaning...
I just purchased a 12 cyl block. it came with the crank, flywheel, oil pump. are parts available for this engine?
three bolts two at the top and one at the bottom
havent even thought of that. thanks.
I recently installed a set of pedals on my hotrod frame the pedals were given to me and were believed to have been on anford truck i purchased a...
I discovered today that a 11 in clutch and pressure plate will not work with an 8ba mill hooked to a 39 tranny will. Not release but can't see why
I put a long pipe on the release bearing lever Connor move it had the trans off and everything looks correct release bearing travels freely it's...
I put a 39 trans behind.a cast bell housing that was with the motor when I got it used the same clutch and pressure plate but the clutch is too...
hey i am building a rod with an model a frame using a 27 roadster body with a 8ba flathead mill i have the book and the position it says to put...
did you have to do anything to the frame to make it work
I have a 31 dodge frame and a 27 roadster body. the frame is too wide and i have thought about modifying the frame, which means that the front end...
Separate names with a comma.
The Jalopy Journal