The Jalopy Journal
The larger power glide valves will be a nice touch with the milling. You using the smaller chamber 848 head? I just ready to start my new 261...
I'm also all over this also Warren. I see you got your 261 all buttoned up and on the strip.
Been rocking my 235 for a few summers now. 55 235 with 848 head, Edelbrock intake, Fenton headers, HEI, PCV setup, 251 Delta cam, Dual double...
A bit of an update..... Been a while but got it up on the road last year. [IMG] [IMG] Took some things back apart after that and added a few...
Im thinking just like you Jim I took 3 of my graph charts from above and marked them up a bit with some more info. I dont think i mentioned that...
What you bolting it to? what tire size will you be using?
Guess what im really after is opinions on the ratios of the #146 I just bought if i used it with my current rear end and tire sizes. I was using...
The #146 transmission that i got is from the v6 model. Changing the tries is something i don't wish to do as they are all new. I was thinking...
Was using a 3 speed on my truck last year but with no OD. It was singing around 3200rpm to just do a bit over 60mph. I got a fairly recently...
As much as i want to lean the jetting it is guaranteed to mess up the threads in these bodies. I already have two of the same carbs i just shelved...
Yesterday was a good day. I installed the carbs as I noted t posts ago and got the truck back up and running. I forgot to mention that i also...
I got the new carbs yesterday and installed them last night. Relocated all fuel line further away from the block to keep it cooler. My existing...
Im having such bad luck with this carb setup I'm ready to sell the truck for a dollar. So I removed the carb tops to punch the holes in the...
My scenario is this. Just recently got the truck on the road after 15 years of tinkering. Have a 1955 inline 235 that was fully rebuilt. Cam is...
Still Have lots I want to add and do to it but its looking alright. [IMG] [IMG]
Look into lokar products. I will post pics of mine and the pull up I installed on the floor of my 49 if you like. Posted using the Full Custom...
Floats seem to be fine and not saturated. What I did was adjust the float level a fraction to cut off the fuel sooner. Seems that the high fuel...
Just got off the phone with him and he wants to review the location of the punched holes in the carb top. I will keep you informed on what he...
Took the top half off yesterday to only find the bowl was about 1/4rd full and the intake passage was wet again. Cleaned it out and found this...
Flow master. Stupid phone changed that around on me. Posted using the Full Custom H.A.M.B. App!
55 235, Fenton headers film aster delta 50 mufflers, H pipe. http://youtu.be/HNJxQQzM89A Posted using the Full Custom H.A.M.B. App!
Clever piston design. Lets you replace half that has the most wear at half the cost. Posted using the Full Custom H.A.M.B. App!
And to whomever is reading this tread do not take it as a bash towards Tom. I never said anything bad about him or anything being junk or bad...
Its to the point the side door has to stay open all night due to fumes.
Gaskets are installed to both the top and bottom of the adapter plate. The gasket that is soaking wet and seeping is the one from the carb to...
The other carb that does not currently leak was botched to begin with. After installing both for the first time and just running the truck for a...
Off topic for this post but you running mechanical pump or electric? You make any tweaks to your mixture screws? Any idea where to find a gasket...
<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/>...
By far the best thing I have seen on this site. Posted using the Full Custom H.A.M.B. App!
I tossed the Rochester's and installed dual webers. Problem solved. No tuning required and boy does it run smooth.
Separate names with a comma.
The Jalopy Journal
