The Jalopy Journal
I'm building a Model A 1928 Roadster with a Hemi. I put the clutch and brake pedals in yesterday. I don't have a lot of room for the gas...
Holly 670 cfm
I'm running a 331 Hemi in a 1929 roadster. I wanted to find out if there one electric fuel pump that would better suited to my car than another.
I putting a 331 Hemi together that is bored out .60 over. It has a fairly aggressive cam. I'm using a Hotheads intake manifold. I think I need a...
You might be able to talk to brass instrument repair shop. They have mandrels to remove dents in music instruments. Just a thought.
My first pass was at a drag strip in Shelton, Wash in 1958 in my dad and moms brand new 57 Chev hardtop with a power pack 283. I took off the...
I'm putting a clutch cover and clutch disc on the flywheel today. The bolts are 3/8ths grade eight fine thread . I plan on the tourque at 25...
Im putting a 331 hemi in a Model A and wanted to see if anyone has ever had anything to do with the Altenator that looks like an old style generator?
I was digging in my gasket set for 331 Hemi 1955. I found a round felt piece that is about 3 1/2 inches in dia. with a hole about the size of a...
I am working on a 331 Hemi. I'm using the Hotheads BBC water pump setupI put the pulley on the crankshaft and it doesn't line up with the water...
Anyone ever used a Dillon radiator? I'm looking for a radiator to cool my 331 Hemi. I have an old radiator that I might recore. The cost is...
I'm putting a 331 chrysler hemi in a 29 Model A and I am trying to figure out what radiator to use. I have talked to Summit and got a couple...
I'm using a Hotheads adapter for my 331 hemi to Chevy manual transmission. I put the adapter on the block and the bell housing to that. Everything...
I only had four bolts holding the pan on so I took a peek at the crankshaft gear and the oil slinger, they are tight so I think I have it in the...
I am working a a 331 Hemi. I just installed the harmonic balancer that I bought from Hotheads. How far does it go on the crankshaft before it...
I've decided to use the orignal oil valley cover on my 331 Hemi. There is a baffle near the front. There were a few pieces of rubber attached to...
Ruckstell rearends were used in Moted T cars. I had one in my 24 touring which we drove across the US. We had Rockey Mountain brakes which had...
This friend of mine solved the problem by using some seats out of a Cessna airplane. They are thin and light. He got them off Ebay.
After looking at Ebay for a tail light for my roadster I've sorta of landed on the 50 Pontiac style tail light. Do you know of a good one that...
I got this old steering column from the wrecking yard to use in my Model A. The column came out of a 1954 Ford Pickup. It has six wires to run...
The day I bought a pint of Shopline red. It cost me $50. I like to use Shopline brand on parts that are not seen as much as the body....
I just checked the number of splines and the output shaft has 14 splines which matches a few other posts. Off to see what I can find for a clutch...
This T5 came out of a 84 S10 behind a V6. It only cost me $50 dollars so I'm not out that much if I don't use the trans. I'll count the splines...
I have a T5 NWC 5 speed transmission. I am going to use it behind a 331 Hemi. I just tried to fit the clutch disc on the input shaft and it...
My brother just gave me some older instruments for my car. There is a SW heat gauge, an oil pressure gauge one SW tach that goest to 6000RPM,...
I just got everything off the one set of shafts except the tower with the pins. I'm glad to know they are tappered. Thanks for the info.
I'm working on a 55 331 Hemi. I'm having trouble getting the rocker arm assy apart. I've used a lot of pentrating oil and it is fighting me all...
I am starting to look around for a radiator for my 331 Chrysler Hemi. I will be using a 32 shell. A friend has a new Griffin alum radiator that...
Separate names with a comma.
The Jalopy Journal
