The Jalopy Journal
Its fully disengaging at about 3/4s of the way down and suprisingly easy to depress and hold down. Before the last one failed it was like doing a...
Thanks to everyone who took the time to trouble shoot this mess with me and fight the uphill battle of educating a newbie. I have discovered a few...
I swapped out the pedal return springs on both pedals for some shorter cut to size springs from autozone and everything is running and stopping...
It is all manual brakes. Single pot master cylinder drums all around. Posted using the Full Custom H.A.M.B. App!
Need to get a shorter clutch pedal return spring it with everything adjusted it does not hold the throwout all the way off. Overall this worked...
On the way to work I could see there is a large gathering of ranflas/bombs at the park under the start of the coronado bridge. Really need to get...
I have all the parts I need the retainer for the fork, a cut to size return spring and I have a single chain link bolted to the link and adds a...
I think one inch is all I need if added to the link between pedal and adjustment rod. Tried the no washer on pivot but just was not enough. Also...
Ok so not the picture I was hoping to put up but this is how it was set before I took it all apart the first time. So this is with the short...
This has some sweet info added to my bookmarks and reading it over a few more times Posted using the Full Custom H.A.M.B. App!
That would give me the angle I need but I am weary of adding onther pivot point Posted using the Full Custom H.A.M.B. App!
I will get a picture up later and it will clear the air a bit Posted using the Full Custom H.A.M.B. App!
Yeah cut weld and heat are not in my bag of tricks yet but yes I think it could be done no problem Posted using the Full Custom H.A.M.B. App!
Mine has only one position but I believe if I had the one shown in your picture I would be ok. The one I have is about 90 degrees and long....
I am out of thread. I think the part I have is out of a truck I may have better luck if I can find the link out of a car Posted using the Full...
Not adjustable. With the long in I use a simple washer and with the short in I was using a few body shims to help the geometry. Posted using the...
I was afraid someone was going to suggest that I go back to the short throwout haha. Yeah the throwout is so tight against the clutch that I can...
Good news and bad news. new clutch is installed. No problem disengaging but alot of problems driving. Hope someone has a trick for this. The fork...
Yeah I picked the tool up as well as new set of hardware Posted using the Full Custom H.A.M.B. App!
Haha no worries I got that as well. Posted using the Full Custom H.A.M.B. App!
Made it to southland clutch in national city awsome people gave me a few pointers as well as haveing the parts on hand. Going to take a few...
18 1/2 breaker worked. Anyone think the picture looks broken hahaha Posted using the Full Custom H.A.M.B. App!
Did not get the washers to work trying to remove clutch anyone know if the are reverse I am not getting any of the clutch cover bolts loose...
I see a finger that is offset lower than the rest. Take a look at the picture and tell me if you think one of these is not like the other. Dont...
I live just east of national city north of the 54 area is called paradise hills san diego...... Clutch disc in backwards is extremely unlikely...
Last night was the last push for a few days due to Easter weekend. That time goes to my toddler. Next weeks is a wash due to a lot early starts...
No dice. I could see the disc move away from the flywheel so I thought it was going to be gold but the clutch will still not disengage Posted...
Yes so the long throwout is In the trans is bolted on. I had to double double work. When I originally took it out I had removed tention on the...
Here is that pic a few days late. Posted using the Full Custom H.A.M.B. App!
Yeah I believe that is why the long throwout is required like many of you suggested earlier. I think it is just alot of other clutch kits have a...
Separate names with a comma.
The Jalopy Journal
