The Jalopy Journal
Bump
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] 1931 Chrysler 2 door sedan, 345 desoto hemi...
By chance do you know what the oem cam specs for a 57 345 2x4 were? Sent from my iPhone using H.A.M.B.
Well it turns out that after checking with a degree wheel it was retarded 3 degrees not advanced 3 degrees, I guess I I mixed up the mark on the...
[IMG] Sent from my iPhone using H.A.M.B.
Donny Johanson ground the cam and from what I remember did not move lsa Sent from my iPhone using H.A.M.B.
By the cam card the cam has no advance built in, it’s a reground original cam in this motor so it was 108 lsa from the factory, not really a wild...
[IMG] Does anyone from experience know what these motors prefer for camshaft timing? This motor just wants to scream..... I’d like to get the...
We do a lot of a/c work at our shop, evacuating and vacuuming the system will not remove anywhere near all of the oil in the system. Truthfully...
K thanks guys looks like I’ll be making one instead Sent from my iPhone using H.A.M.B.
The pictures probobly deceiving the hood needs to be about 33-1/2 inches it looks really stretched in the picture Sent from my iPhone using H.A.M.B.
I’m looking for the length of a stock 31 Plymouth hood, I was going to make a hood, but would really prefer the look of a oem hood if it’ll fit...
[IMG] I converted a 2x4 manifold to 3x2, wanted a 4x2 but it just wasn’t going to happen, not many options Sent from my iPhone using H.A.M.B.
Should have mentioned it’s a straight linkage Sent from my iPhone using H.A.M.B.
[[IMG] Sent from my iPhone using H.A.M.B.
I have a newly assembled stromberg setup on my 345 desoto that seems to run and idle great but have a feeling it’s running more rich at idle than...
[ATTACH][ATTACH] My 31 Chrysler 345 desoto hemi from ottawa Sent from my iPhone using H.A.M.B.
Check to make sure your air gap isn’t too large at the pickup, too large a gap will give intermittent spark depending on temperature . Just cause...
Hence the c471 number I guess, I'm not sure if it's chrysler or desoto but it's up for grabs on that auction site, not mine by the way, Sent...
Anyone ever seen one of these intakes around, very odd looking, any inputs on what the extra bosses are for on the sides?[IMG][IMG] Sent from my...
Left in 1st and 3rd picture, looks identical to a cj6 chrysler Sent from my iPhone using The H.A.M.B. mobile app
The frame on the left is 29-30 mopar Sent from my iPhone using The H.A.M.B. mobile app
Sounds good to me, thanks for the info guys Posted using the Full Custom H.A.M.B. App!
Sold Posted using the Full Custom H.A.M.B. App!
Yah the key seems to need to extend another 1/4 inch or so to work, but you can't slide the keyway at all, I thought about cutting the end of the...
Does anyone have a solution to installing a fuel pump eccentric on a Hemi with la timing chain, there is nothing to keep the eccentric from...
108 lsa. $250 Obo. Will take partial trade on tall deck desoto intake, 2x4 or 6x2 Posted using the Full Custom H.A.M.B. App!
330 341 fireflite desoto hemi original camshaft. Checked for regrind, great shape very little wear, 108 lsa[ATTACH][ATTACH] great core for...
Separate names with a comma.
The Jalopy Journal
