The Jalopy Journal
I also have a Carter AVS tag 4028SA which shows to be for a 66 275HP 327. I fits both manifolds and I’m assuming it came from the factory on the...
On closer examination I believe your right. What is the significance of the H under the firing order?
Here are some pics of the manifold in question. [ATTACH] [ATTACH] [ATTACH]
I have a cast iron intake manifold casting number 3872782 date code E116. It also has a large H cast just below the firing number. It does not...
For anyone interested in this product, I have retired and am referring everyone to Carinsulation.com. Kevin is a good guy and will take care of you.
On your way to or from Owens you definitely need to drive Hwy 114 west of Graham. Fella there has a huge yard with mostly old trucks and pickups....
They are VO312
Wow, I stumped the squirrel! I thought you would have the definitive answer!
I have a motor I pulled out of a 69 Impala. The engine suffix is HN which shows it go be a 300 HP 350. The serial number is 19L044219 which shows...
The other day I sold my '70 Chevy van to a guy that never drove a three on the tree. Had to teach him how do drive it. Couldn't imagine teaching...
Back in the 70's I had one on a muncie behind a 409 in my 62 impala. Loved it.
I used a 55-56 Chevy emergency brake handle and mounted it on the left side of the steering column. I had a cable from an unknown source that I...
I bought a rebuilt nailhead long block a while back that had been sitting for many years and it had the same problem. I removed the lifters that...
I've re-used axle brackets several times. I cut them off my holding the torch at an angle where back side of the cut is right next to the axle...
I paid $500 for a 09 out of a big truck a few years ago. Luckily it had 340HP passenger car heads on it already. Had standard bore and stroke. Was...
Mature is a state of mind. 64 here and still have a way to go.
the saginaw full syncro trans came out in '66.
I sold a '70 chevy van last week. It had 3 on the tree with OD. I had to teach the new owner how to drive it.
You should be able to tap the hole with a 1/4 pipe tap after you remove them and screw in socket head pipe plugs.
I bought crimpers from American Autowire. Best I've used but pricey.
I either use a mechanical pump with the return line or use a metal inline filter with the return line. With either one you have to run a 1/4" line...
I'll be there. Just look for the sedan delivery on the south end of row P
my 38 Coupe 409 with 348 3 dueces. [IMG] [IMG]
[IMG]
Just in case you didn't already know, the 283 had a rope rear main seal through '58. Put a neoprene seal in there and you have a big leak. Use the...
Sedan and coupe frames are the same. 39 is supposed to work too. I removed the frame from my 38 coupe that I hacked up myself in the '90's. Put...
Read this..... http://www.fordification.com/tech/overdrive.htm
409's can be found hiding in big trucks. The one I have in my 38 Chevy Coupe came out of a '65 wench truck. 348 intakes fit the low performance...
on the left is an aluminum 401-425 TC. on the right is a cast iron one off of a 364. Notice the rectangular area on the right side of each, its...
Separate names with a comma.
The Jalopy Journal
