The Jalopy Journal
3 Speed and truck based 4 Speeds do not interchange 61 to 64 on truck bell housings, patterns are different. To use a T98 you will need the four...
Ron, I will see you Friday.
Nice truck, You might also want to find the correct 61 to 63 Model 66 doors as the doors pictured are for a regular model 81truck.
First, look and see if they cut off the front crossmember frame 292 engine mount as it is not used for 223s. You will need to replace this to...
Use rear dump block hugging type headers to clear the stock steering box. Remove the stock bell housing cross member as it now serves no...
Here is when it was a true barn find. [IMG]
Seals look like LMC manufacture. Remove them and purchase a set of Dennis Carpenter Seals. The only ones that fit. The door will need to be...
Nice job.
The 61 to 64 uses a one piece box and steering shaft. You can use a mid 80s toyota 4x4 box and some modifications. you will also need a new...
The radiator pictured is a cross flow out of a late model chevy. To fit it the radiator, the radiator mounts on the core support had to be cut off...
Some correct ID exhaust tubing split and carefully welded in place and finished will do the trick. Sounds like a TIG job down at Elpolackos....
The rear model 66 (uni)bumper and brackets are reproduced. This bumper is the same as used on the 57 to 60 series trucks. The Front bumper is a...
Ford changed the head in 87 to accommodate the EFI. This head and the EFI cam will need to be changed out to a head/cam better suited to carbs....
Color code G for white. All this information is found in the ford shop manuals and parts books. Plus it helps to have over 30 years of...
22 S F100 66A A 12 5000 114 3600 71 22 is inaccurate. it should be 120 for the wheel base as it is a long bed. There is no "S" for color in 63,...
All three speed and automatic trucks had a low hump cab. Model 81(conventional) or model 66 (Uni) All four speed trucks had the high removable...
F10= F100 J= 223 IV inline six R= San Jose assembly 340995= Born in the month of October 1962 it is the 15,995 thousand F series truck produced...
I will try to get there. Garbz
The radio was installed in 1964 by the owner when he recieved it from Whitby. Bill still owns it to today. did you see the old guy with the cane...
Your 60 Crew is Aftermarket and Manufactured by Crown. Ford farmed all crew cabs out until 65 when they became factory produced until 79 at the...
In Glendale just stay north of Peoria ave. I have lived here in north Glendale for four years and as long as everything is behind the fence and RV...
Here is a "gasser" Axle ELPolacko made for one of my projects. Fits 61 to 64. [IMG] Anything but cheap. Garbz
Bert and Ernie are quite Proud of it. Complete with crossed arms telling the world they are the shnizz.... Garbz
Check out this air bag experience http://www.nolimit.net/boom.htm Garbz
Mike The entire front section can be had new aftermarket. Or there is a entire new fender being reproduced by the old obsolete ford in Oklohoma...
I ran for years managing state park projects with the bumper sticker "Pave the Planet" Another good one "Cat the other White Meat" Garbz
Just saying hello. i was traveling through some links (MII and failures) and was turned on to here. Some of the people here i know so i hope i can...
Here in Eastern PA, Hazleton Workin on 61 to 66 ford trucks. Currently under the knife 66 Crew Cab with full modified body lines to unibody...
Separate names with a comma.
The Jalopy Journal