The Jalopy Journal
22 BTDC with vacuum advance pipe clamped if I unclamp pushed the timing to 40 BTDC , using the vac port on the base of the edelbrock 4 barrel have...
Update turned dizzy to fast idle then backed it off few degrees, so took it out for a drive no flat spots or coughing and check timing on my...
Timing set at 13 BTDC also check damper makes again timing case which is TDC , but I wll give it ago , thanks
Leeds yorkshire
Today’s update all back together today , with new duel plane manifold with new gaskets, distributor base plate repaired with petronix kit and...
Well guys update pulled the distributor to fit the pertronix kit to find the base plate bearing had come apart ,so distributor is scrap picked it...
The engine is so tight to the recessed fire wall ,that I have to drop the engine off the mounts to remove the distributor cap ,so if I use a...
Had it running tonight after 10 hour working day , loss my spark so I will pull the distributor and fit a patronix kit ,unless I can find a small...
Which manifold would you suggest
Update from England, pushed the timing to 14 BTDC with vac line clamped ,revs out at idle ok , still not smooth on light throttle . Would you push...
Ok guys quick update , I got it wrong points distributor new (too many projects ) ,checked TDC with bores scope line up with zero on tv damper...
Help needed with a 327 ,backfires / coughs back up the carb with or with out the filter on ,we get a flame then cuts out when you pull away or...
Thank buddy what do you guys call it so I can look on brookville site
Thank guys but need need diagram of body parts ie what panel sits under the door
Hi guys I have just bought a steel 28 rpu with a aftermarket A frame build to the same dimensions ,would like some body information ie diagrams...
Could anybody help we have a tri power Barry grant demon 98 set up new been in boxes about 7 years primary and both outer carbs secondary's with...
Looking for help we have a steel 32 5 w running a fresh build mild hemi and a turbo 350 transmission fitted with a Barry grant demon 98 try power...
So who sells after market parts for a 42 / 47 ?
Hi Guys Have just picked up a 1945 short bed ford ( jail bar grill ) to ship home to England and have never owned a truck of this year do they...
Fan is a puller ,ignition is an MSD with no vac advance,turns over will not fire ,running mini starter,running with no hood or sides
We have a 1956 354 hemi with 800 miles ,since a rebuild mild cam all new internals,fresh bore ,new Pistons ,reworked heads .running Barry grant...
Had a private message sent but have lost it about some part for a plymouth could you re message me please
Thank you for your help
Imported a 1941 Plymouth coupe to the UK as a builder ,once home found missing some side moulding ( does any make repro mouldings ) Also found...
As a HAMB user in the UK ,I almost got scammed by an guy in Ireland using rods and sods ,they are working all the wanted adds ,see you guys for...
Kept the stock valve length ,retainers from the cast stock heads ,will go with longer valves
cam timing is bang on ,looking to machine spring pocket or .100 longer valves ,just working out which will be the best
thanks boys
Valve train did not come as a kit ,just bare heads ,all other parts picked up after
1982 350 sbc + 0.30 new pistons,crank job all new .mild cam in.420 ex.443 lift ,hydraulic lifters.new alloy heads( unknown make ) 64 cc com...
Separate names with a comma.
The Jalopy Journal
