The Jalopy Journal
BOTH pans for $75 or $50.00 for one only. One is pretty clean, the other grungy, but both good condition. Can UPS or you pick up in Flowery...
Excellent crossmember, picked from a Ford dealer who was opened 1923 until 1962. Can ship UPS or you can pick up in Flowery Branch, GA.
Excellent fly, resurfaced and balanced, then found out it does not work in late FH. Perfect teeth, 3-1/8" clutch bolt spacing. Buyer pays...
Thank you.....worth a look, I guess the worst thing that can happen if the ball falls out inside is that I will have to spend a couple hours...
Its the steel ball a little bigger than a BB, it shuts gas off when the float gets up, if it sticks in the "open" position, gas pours out the top...
I
Second SOS today, this about Flaming River Corvair box......the set screw is frozen into the set nut, now I realize its got too much play at...
Stromberg 97 question: have two new stromberg 97s, all good except front carb has the float ball stuck if the car sits for a few weeks. Any...
Easy Peasy....Cornhusker has everything you need...perfect solution.
Aren't you glad you ask?! Agree with others about ditch that exhaust mess, change the tail lights to 40s Chev, change the tires and the wheels...
Be prepared for a difference, maybe not huge, but you will notice a difference in steering response and effort with a longer arm. No biggie, just...
Folks drove from New York to Texas, Chicago to LA, etc in 1950 and never gave it a thought. GO.
Ran early Hilborns on a Wayne Chev in the early sixties, one of your questions was about how to read whether it is rich or lean......all I...
If you are finished with frame mounts/drilling/welding.... powder coat IMO....esp if you want real durability.....it is NOT that expensive, they...
Dang, this has to be post of the year.....what a find, what a story
Agree with Phil 7 degrees good starting point....depending on your steering setup you may want to play with caster a bit, you will be surprised at...
IF those are the new 97s, the little check ball is stuck. 11/16" take it loose from carb, free it up with your fingers, .....it will happen again...
Gotta be post of the month, some great pics in comments, leaving it with patina is perfect. Flattie fer sure, and leave that little hook in the...
Using a reversed Corvair unit with an old truck arm on my 34 Coudan. NO problems, it was a bit slow, so redrilled the arm off the spindle by...
Maybe make a "Coudan" like I did, out of a four door sedan body. Some day I will post the build on here, but no donor car needed, just shorten...
[ATTACH]
I have a flatty to S10 trans, used a plain ol standard master cyl and lined it over to a slave from Krylon/Cornhusker.....works great, and a LOT...
Mint condition, T rear crossmember, pretty sure never on a car, got from a dealer who actually operated from 1923 til 1964. $65 plus the ride.
Had S10 trans checked before build, the shop said it was great.....but it jumps out of first gear as soon as the clutch is released, can't even...
1934...it started life as a Fordor sedan, we shortened it then grafted front of front doors to rear of rear doors....do NOT try this, nothing...
Pitman is 6" and steering arm is 6"spindle face to c/l of bolt.
SO, finally took the coudan out after a 13 year build, and it all went well. Biggest single item is need to speed up the steering. Corvair unit,...
Well shit, my double bad.....guys like me are a pain, and here I went and did it, left out maybe the most important single item.....I am one of...
SO, it's annoying when we all try to help a guy out, and he never says what the solution to his problem was.....after some more fiddling and...
Separate names with a comma.
The Jalopy Journal
