The Jalopy Journal
A S10 T5 with a Jeep T5 input shaft and a Camaro T5 front bearing retainer will bolt up to the car bell housing and fit the clutch disc you have now.
I used 65 Mustang 289 manifolds on my 351 in a 52 Ford
You can't depend on the wire colors on a 6004 switch. Signal stat would change the colors for OE installations and they were all different. Once...
This sounds like the clutch disc is not being clamped on both sides. Either the disc is backward and the hub is keeping the disc clear of the...
I'll looks but that has been a long time ago. I fabricated the brackets out of steel plate. CAD(cardboard aided design). Likely one bracket to fit...
I did a 1946 Chevy pickup using 1992 Toyota Land Cruiser rotors and calipers about 15 years ago using the stock Chevy hubs with new tapered roller...
Many years ago there was a 22 acre Ford plant that had closed near me, and while driving by it with my wife I told her "we should buy that.". She...
If you get hold of Gerstner they can tell you when it was made. I suspect it was in the 1940s because before that the mirror bracket was plated....
I worked for an Oldsmobile dealer in 1966. Guy comes in with a clean 64 Corvair with an oil leak. salesman takes in trade on a F85. Used car...
I worked for a Buick /Pontiac dealer in 1965. The owner drove a new Electra 225 back and forth from his home every day. His home was on a lake...
Ford F1 and F100 pickup used a flatter center like the 46 to 48 Ford car rims until 1962, but I don't think even those wheels will clear the axle...
It's from a F100 late 70s to early 80s. F150s got 31 spline axles
Sun tach transmitter EB9A internal condition unknown. Outside is in good shape. $40 shipped in the US PM me
Sun tach transmitter internal condition unknown. Retrofit conversions are available $60 shipped in the US.
I had my own shop for over 30 years. I never had any Wilwood 2 psi valves that worked correctly. I have a box full of them. Use anyone else's valves.
$40 shipped
ttt
Back in the 1980s, when a Mustang II front end was used in an early Chevy with a stock Mustang II crossmember the springs interfered with the...
Mid 80s setting behind a buddy's 49 Black Ford six business coupe. Old guy come up all excited "My first car was just exactly like this one....
Made for use in a dragster
They should be worth the price just for the buckles
The exhaust manifolds are Avanti manifolds available from Studebaker international https://www.studebaker-intl.com/
Why don't you recalibrate the speedometer to read KPH instead of MPH?
Jaguar XJ6 seats are narrow and fit well in a model A. I used some out of a 1985.
I have had the best service out of Mustang II front ends by increasing the caster to about 4 degrees, and reducing the toe in to 1/16" or less....
That is a 5/16" SAE 45 degree flare fitting. You need to adapt to a AN-6 fitting
That cab, with variations, was used for 10 years. Over that period both types of window glass trim was used. At times both were in use at the same...
still have it
make an offer
Separate names with a comma.
The Jalopy Journal
