The Jalopy Journal
If anyone had Housing lengths it might prove beneficial information when choosing a generator for multiple carburetors etc without the need for a...
I've tried to source information but came up empty, does anyone know if 6 inches is standard length of the 6v ford generator housing? I'm trying...
They are D nuts and you set them with a rivet gun, most model a suppliers have them. https://modelastore.com/rivits-and-d-nuts or you could use a...
Great thread, Amazing skill man.
Is it possible to load the lost pictures back if anyone saved them , most of all the steering box rebuild post ect are lost , such a great thread...
Repops do not exist to general public, but currently a few people messing around with bringing them back from the dead (not hard) but is it...
Hello everyone, I want to run 600x16 fronts and 750x16 rears, I really wanted to run the Firestone 72230 Dirt Track Ribbed Front Tires but they...
How close is the lower radiator hose going to be to the bolt and the outside of the mount ?
I agree, I feel more bang for the buck with the smith heads, you don't see them often the federal moguls are slowly becoming bellybuttons
Early pans had a slight notch for the starter keep that in mind, latter did not
Ya guess missed the part were he sold the 29
Any more on the roadster?
Correct it is hydrostatic, I thought the same, put it in and done, but have had a few people telling me it won't read correctly but cannot...
Can anyone point me in the right direction to use a original 1932 Ford gas tank sending unit in a modern tank? (I'm using original gauge) I Was...
Does anyone have a full catalogue of the inventory being sold? The online site says there is more?
Way back, when things were simpler
Nice project, lots of us Ontario guys on here
I'd do $300 anything can be repaired if you have skill or money
[ATTACH]
Just purchased adaptor kit from early v8 garage (excellent quality) just wondering if you could weld the ring to the backing plates?
Top notch work
Ok judging from the responses it’s half mixed emotions Thanks for weighing in fellas
Shipping costs are very high And I bought this local , I have others that need straighted and could send out. ( again shipping cost ) But this...
It is indeed original
Hey fellas , I have a partial drilled axle , and was wondering if it’s gojng to be a problem with heat to mig ( I don’t own a tig) the holes...
You could always mount a Bluetooth speaker inside of it ?
These are two great sources for info Nothing wrong with the 32 box with a few upgrades King of the 32 box. Herb Howell in Ohio. Roller...
Anyone have any tips/ideas ? The left side of the wishbone is good the right side looks cocked ? And will not go onto the axle When I rotate...
I’ve had had plenty of Scott injectiors. But have Never seen the scotts run successful on there own Would love to hear this run
Separate names with a comma.
The Jalopy Journal
