The Jalopy Journal
So far I have used a combination of soaking in simple green, scrubbing with a wire brush, rinsing, easy off, rinse, and repeat. I am on my third...
The grease would be on the inside of the metal sleeve where the pivot rod goes through; basically metal on metal.
I see now that the spacer will leave the control arms at the stock setting but the point at which the top of the spindle pivots (the ball joint)...
I had not considered the ackerman angle, I will have to look into this further.
So I am thinking about using some ball joint spacers in a pretty nontraditional way. I have my 69 bonneville that I am converting over to disc...
These are rubber bushings with a metal sleeve insert.
I am about to replace the front control arm bushings on my project and wanted to know if it is advised to grease the sleeve inside the bushing?...
At the truck stop, is that self service or would it be something they perform?
I am finally on the reassemble part of my project and the greasy dirty parts I keep having to deal with are really becoming time consuming....
GassersGarage, I am limited to upgrading springs and shocks up front. Out back I plan on using a G80 differential from 94-96 caprice/impala ss to...
The frame is in good shape, getting ready to coat with Eastwoods chassis restoration kit and figured if the foam would add an advantage then there...
Waco is a strange little town... First off the foam has been shown to stiffen the frame of unibodies as well as dampen sound and transfer kinetic...
I have heard of how unibody frames greatly benefit from being injected with expanding foam to increase rigidity, what I would like to know is if...
What about the dash, the one you have pictured looks brand new. I have looked into several companies like justdashes.com to redo my dash but the...
That looks like good work, and he is very close to where I live. What did he charge for the seats and door panels, if you don't mind me asking....
I know this is an old post, but does anyone have contact info for Clemente in North Houston, I googled him and nothing came up
Hi all, I am not sure if this is the right place for this but I wanted to share my recent freight shipment experience with everyone. I recently...
Hi all, been lurking the forums for a while and figured I better introduce myself. I am just getting back into american iron after a few years of...
Separate names with a comma.
The Jalopy Journal