The Jalopy Journal
Keystone wagon white rims would be another option 16x7 8 lug with backspacing of 4 inches.
Jalopy Joker...see my profile pics and Dale Fairfax....the tires rub on the lower shock mount. 1955IHC...yes, it is looking that the 70-80's rims...
1. Changing my split rims to 16x8 - 8 lug 2. Bought rims and tires - dodge - 285/75r/16 all terrain tires off of craigslist 3. Mounted them...
Ok I found the problem and not going C R A Z Y!!! The company sent me the wrong sending unit after I told them my problem and bench testing the...
RMR&C...no, the gauge does not work when sending yellow wire is off. All wires hooked up correctly. I will take it all out again and recheck it...
Welcomed F250 friend! Good luck with your project and let's see some pics!
OK, I here is the hair pulling question: Tank is new -- Sending unit is new for 6V or 12V -- Stock 6V gauge Tested all at my desk and worked....
Thank you for all your replies! I am going to try all of them by this weekend!
New 12 volt sender and fuel gauge reading full. Took out the fuel sending unit, measured gas 1/2 full in tank, checked ohms 12-48. Checked sending...
Yes, I did plug it off. Thanks.
Thanks 57Custom300. What do you think about placing the free engine I received, 1955 239 EBV, into my truck and possibly purchasing a later 2-4...
Yes, all responses help and are welcomed in furthering my directions on future decisions. Thanks.
Maybe, just a thought, it is too much pressure in the motor and I might have to use or make a restrictor valve because of the many small leaks...
1954 239 ohv Y block engine with 1955 F250 intake, 94 holly 2 barrel, and later model valley pan, hooked up hose to valley pan and placed an FV100...
Great info and pics! I went with a 3/8" hose from the valley pan to a 1/2" hose to the pcv valve into the intake manifold. But, how was the set...
I guess I need to make a hole in the old crank case vent (blocked off now), place the pcv valve inline and run the hose to the valley pan or ???
Rwenuts....yes, that is where I placed the pcv valve (hoop98 picture).
So then, I should do what and place the pcv valve where? Any pics anyone?
pcv valve placed in the extra hole in front of the carburetor and crank case vent tube blocked off.
Separate names with a comma.
The Jalopy Journal
