The Jalopy Journal
[ATTACH]
If the hex head is still the bolt I have a small 1/4 drive air gun with a 3/8 drive anvil. I heat cherry red then use the small impact while I...
Take a 12volt test light check for 12 volts on battery side of coil with key on. If power is good go to ground side of coil and have someone crank...
[ATTACH] [ATTACH]
What's wrong with mechanical brake's? I use the car as every day transportation a few year's back and never had a problem. Fenderless, banger with...
Thank you for all the replies,help and idea's. Flipping the actuator's would create different problem's. I got it to work. I installed the brake...
Right from the 1932 ford book. Look's like they go under to me.[ATTACH][ATTACH][ATTACH]
I did. The 1932 ford book, by David G Rehor. And hour's of searching the internet for original 32 chassis picture's. The shock's are still...
That's what I was thinking. Thank you
I'm no expert on this stuff. Think your thinking of model a brakes. Every picture I have seen of 32 brakes look's like I have it assembled correctly.
I knew setting myself up for that one. When brake applied I have enough room with straight rod. when in relaxed position it rubs. Back to the...
[ATTACH] [ATTACH] Building an Av8 using a 32 front axle, wishbone and brake component's. Using a speedway front lowering spring. Which I think has...
I bought one. I contacted the company they gave a couple options to purchase it. I got mine with the storage tray under the seat. The company told...
X2
Here's mine!
Thank's everyone for the quick response. I do bend exhaust some stainless mostly aluminized tubing. I have bent pieces and have tig welded them...
I need to fabricate headers for my av8. I would like to make them out of mandrel bent stainless. What size tube should I buy and who is the best...
[ATTACH] [ATTACH] [ATTACH] Car back on frame as a roller with tire size I'm using.[ATTACH][ATTACH]
Getting there man! Thank you for all your help and guidance on this project! Would love to be driving summer of 2015! Need to stay focus and put...
It's looking like 6 3/4. You may won't to go 4 1/2 if your goal for is 7 inches. Good luck brother
1930. I will start a build thread soon on the car. Rounding up a few more piece's and start assembling!
Your car look's great! Nice clean coupe body!
That's what I thought! 4 just inst enough.....set the tape marks at 5 and start cutting!
Forth pic sorry for confusion forth picture down 4 1/4 inch chop. Not enough went 5
Stock, 4 1/4 and 5 inch
Has anyone used bought a wood kit from ford wood? Curious about fit, quality, customer service. I searched but come up with nothing on what...
Happy to here you have made it that far few problem's. I thought for sure there would have been a lot more! Can't wait to see your pictures from...
Jon who would have thought you would have hit celebrity status on this journey! Car look's good driving by. Cool picture's. Very happy to see that...
Separate names with a comma.
The Jalopy Journal
