The Jalopy Journal
He has also written about it in his How to Build Horsepower series, as well as a few videos on YouTube. In the book series he talks about it more...
That’s a nice intake. I was thinking along similar lines as the bottom section and adding mechanical fuel injection for bonneville.
That is a good find! I do have to say, I prefer flat pistons over domed, and it looks like Ken Kloth like them too if this example is evidence of...
Yes! I have seen those before, I believe Bored & Stroked posted them. I believe the Navarro head posted is one of their standard heads. Here is...
yes sir, that would be him.
Thank you for reminding me, I do have that usb drive from Abbin! I will need to do some reading today. I will search out that article. There was...
That’s one book I don’t have, as well as JWL’s book. I have ordered Ron Halloran’s book. Reading Abbin’s book and his flow testing, some things...
Congrats on the records! I measured cross section areas today. With some exceptions like how the short turn is not blended to the bowl and it...
I have one of the cheap Amazon ones, was a couple hundred bucks. Only has one probe and it’s flat. I may find some spots in the port where it will...
Flow bench is built and I am going to be getting some numbers this weekend using a calibration plate. I am using Vizard’s example in his porting...
Oh I am definitely watching. I am still in the planning phase of my build. It’s very inspiring and congratulations on nearing the end!
Alright, port mold for cylinder 2 is done. What a pain to get out, but now that I know this silicone can handle some pretty hard yanks and some...
I tentatively agree on this. I am really looking forward to watching where the air wants to go in the port and how it comes out without a valve in...
Thank you, with good blocks being harder to find, I rather get some good data in something disposable. Plus the added benefit of being light and I...
After doing years of research on here and the ford barn, as well as books I have available, I have decided to start down the path of trying it all...
I have a 1007b cam ground by Pete (as well as some 425 eliminators for another project). I thought one of the cranks I picked up when I bought the...
Thank you Carl!
Way cool Carl! question as I am going to be building a Flathead for a FED… are you running a potvin 425 eliminator cam? I had Pete grind me a few...
I got my rear U bolts and pads to mount the rear spring today. While I was looking at Millwork Hot Rods, I saw their front spring u bolts and pad...
I haven’t a clue. We are using the technology in aerospace for some complex parts, but I am not in that division so no clue on what its...
Yes, it uses laser sintering and a powdered form of the base metal desired.
I’m in the same part of my build, same rear tires. I’m not running fenders most likely so it’s less of an issue. I’m getting the body together...
I will be there on Saturday as well. Hunting down a a rear panel for a 28/29 model a Tudor. Mines completely toast, paper thin and crunched up.
Not much to report today besides getting all the cross channels attached with 10-32 screws. Next step will be to detach the bolts at the mounts...
Made some progress today. Laid out the subrails, got the rear subrail crossmember attached and then located and drilled the front mounting holes....
Also! I discovered that I may have mounted my spindles upside down. Tires are cambered out, I am going to flip them over and see what happens. I...
[ATTACH] please excuse the mess, we are storing my late brother in law’s car on the other side of the garage for the foreseeable future. I may...
I am absolutely horrendous at remembering to take pictures and update here. Not much has happened due to working overtime. However, here’s what’s...
Looks real close to what I am aiming for with mine.
I will probably buy one from Classglass. I have a spare Flathead block in my stash, a banjo rear, and a seat. I need to mock it up to see if I...
Separate names with a comma.
The Jalopy Journal
