The Jalopy Journal
did the have the same bolt pattern for the backing plates as a model a ?
when did ford start with cross steering like 35 or so ??
the 727 never had a cable far as i know of the 518 and the 727 are almost the same case style for checking it in park you can do it when you...
you can pull the leaver and hold it but you will have to find the right spot so it will shift were you want it, if you hold it to far it will take...
no just the shaft sticking up but if you put a kit in your valve body or by one you will still need to put te extra parts in your trany under the...
you can buy a manual kit to make it full manual no need for the linkage but the shifter linkage
if you have a stock leaver with the sping in it ??? the other one fits in it spot and the cable runs back wards manual valve body i put a kit...
go to the junk yard and get the cable from a overdrive trany and the brackets and leaver from the trany and make it fit the motor get one off...
i have a almost a complete 348 missing the dist and front pulley came out of a truck the block is .040 and the crank is .010 on both
i took to long to make up my mind and he sold it i thought he wanted to much for it. i bought a motor from a guy said it came out of a truck got...
i gess the best way of doing it is to put a mid mount in it and do it right the first time
it is on bbc in a f100 frame i gess i could put a mid mount in it
i want to put a turbo 400 in my hot rod it has a stick with the bellhousing mounts , my motor is mounted up front so my question is has anybody...
i got it soaking with wd-40 now will try the other things later i have time not going to do any thing with it untell this winter i sanded what...
i bought a motor that is stuck what is the best to get it unstuck, i have the heads off but there was a little rust in 3 of the clynders
thanks guys just wanted some thing driffernt for my hot rod im sick of seen sbc in every thing my truck is old this will fit in there good
ok thanks guys
thanks guys you read and hear so much driffernt storys that you dont no what to bleave
that is what one guy told me you could put car piston it it and it would come out to around a 9.5 comp motor good for a street car,
the last 3 number of the block is 655 when i looked it up it came to be a 348 but then i didn't look any harder, but the dip stick is on the pass...
no we had a hard time to get it to run you cant see behind it also it has alot of blow by the ring must of stuck other wise kind of hard to here...
i found a 348 out of a bus i was told the block are driffernt then a car by the top of the bore they are cut out are the piston the same as the...
i don't whatkindof front fender you could put on it maybe a 1930's ford ??
look like the same dash and windsheld
i seen a pics of the grille shell looks like this one but just going by what i can remember he wanted 500.00 for the shell the guy i got it...
i put my pics bigger but didn't help
on the back of the gauge it has biewars warmen made in the usa yes it is a big truck cab gross weight 35000 im going to put it on a 1/2 f100...
were some bigger ones
i bought a truck cab dont know who made it can anyboy help out thanks
what??????????????
Separate names with a comma.
The Jalopy Journal
