The Jalopy Journal
We all have a story... I bought a 57 on eBay. After it arrived, it was not as described. Ebay let me know their refund coverage doesn’t cover...
[ATTACH] this is crazy, I have a TH350 in my 67 ElCamino. Was soaked with leaks. Put a new pan gasket an filter. Helped some, but leaking on...
Thanks to everyone that answered. I think I have it working. When I installed everything, I bled the lines several times. Even used a pressure...
Here's my 57[IMG] Sent from my iPad using Tapatalk
These car were made to look like that. They don't look right any other way! Sent from my iPhone using Tapatalk
Installed a new CPP power booster, cylinder and proportioning valve on my 57 Chevy with disk/drum. Pedal pressure is great and calipers and...
painted my heated housing and duct on 57 Chevy. I also like the looks.
just installed a Raingear kit in my 57. Fits under dash, elect. Fairly easy install and works great. Might check their website to see if they...
have an update.... removed the Ram clutch kit and installed a new OEM 69 Camaro set. Replaced the upper clutch linkage from pedal to a-bar with...
I changed a 64 from auto to manual. Used 64 chevy parts. Only issue was the crankshaft was not drilled deep enough for a manual pilot bearing. The...
I've come to the conclusion that there must be thousands of trifives out there with late model bellhousings and are working fine, so I am checking...
I've had many cars with mechanical linkage through the years. Some pushed in easy, some hard, but they all pushed the same throughout the stroke....
Torkwrench- If I had any of the parts, I probably would. The car was an original stick, but the previous owner installed a 454/turbo 400, so all...
I'm not far from you. In Lochbuie, just off I-76 and Baseline Rd (WCR2) Attached is a picture of what another guy did and he says it worked great,...
Here's a couple of pics that show the inch or so problem with the bellhousing z-bar ball mount attached... Note there is about a 3" difference and...
Thanks for everyone's thoughts. Here's where I'm at today... the rod pushes down and pops the clutch arm off the pivot ball in the bellhousing and...
Have a question on my 57 Chevy. The z-bar is level between the frame and the engine and square. The frame bracket is in the original position. The...
Old problems never die. Have a question on my 57 Chevy. The z-bar is level between the frame and the engine and square. I have the bellhousing...
Hello, Newbie from Colorado. Look forward to joining. Currently have a 57 Chevy I am upgrading over the winter.
Separate names with a comma.
The Jalopy Journal