The Jalopy Journal
If you have voltage at the tank by removing the ground the gauge should read either full or empty. Then hook the wires from the gauge together...
What I’ve done is after painting, let it flash then take a rag with thinner and wipe the paint off the areas you don’t want it. It takes a few...
[IMG] The last one I️ set up was about there. Ran great! Sent from my iPhone using The H.A.M.B. mobile app
Unfortunately that’s a downside of being lowered. I usually deflate the tire, and that gives enough flex to squeeze it in and out. I use a towel...
Not sure on the spindles, but a friend of mine put the 3" lowering springs from jamco all the way around on his 65 deville convertible and it...
I've successfully converted several systems to dot5 with no issues whatsoever. I've found good old gravity bleeding to work.(it is a slow...
I have seen tires bad right from the manufacturer. I would rotate the tire and retry, also try to balance the bare wheel first to make sure it's...
We install dot 5 in a lot of collector cars here at our shop. It has been a huge help with moisture issues since in northern Ohio cars sit many...
Separate names with a comma.
The Jalopy Journal