The Jalopy Journal
There are other options - "Hells gates hot rods" offers exhaust flanges and intake flanges along with kits . This is what I did to my 248 in my...
Yes, the rust of Michigan welcomes yo too.
Mine is a driver not restored just a vintage vehicle . Once a year I take used trans fluid and spray the entire under side , door jams , under the...
I feel the same way about my 1941 Buick special , keep it the way it is to show the younger generation of car enthusiast that it doesn't have to...
My first Intake header combo that I did in my garage , me and my mig welder . I fabricated ,designed ,and set up tri power "3 holley 94's"...
You can also try a search on this Buick pre war site has a lot of different input . http://forums.aaca.org/f165/
That looks dangerous with the base 18 horse power plant much less the airplane one .
when doing the build pay close attention to the deck height , normal blocks have up to .15 in the hole ( this is top of piston to deck top where...
I posted it on YELLOW BULLET . Race forum -also seen the post on AACA . good luck
Yes , a 1.23 - 60 foot will possibly throw the switch out on launch of the trans break .Always want pull out to activate push in to kill .
Mine from my 1941 Buick special . [IMG]
10.5 hayes street strip clutch driven daily and put threw some hard abuse (multiple engines) for years .
It did have a 565 bbc in it at that time though . foxbody was faster then . [IMG]
This is our continuous duty relay wiring on an old race car . The wiring is coming from the inside of car and going to the the kill switch on the...
I kept the single exhaust ,but it did change tone almost choppy out the tail pipe . Along with piles of soot from years past .
another of the headers and made "Y" pipe to single exhaust . [IMG]
My own built tri power set up and headers on my 1941 248ci buick staight eight . [IMG] [IMG] [IMG]
If you are holding the cam in your hands and the distributor drive gear is black iron and pinned on the billet shiny shaft then you can use good...
This junk yard looks like the one that gas monkey garage got the short VW van from for that episode ... sweet clean steel as far as the eye can...
another picture before teardown . [IMG]
my 41 buick special engine getting rebuilt this winter . http://s1358.photobucket.com/user/73pontiacventura/slideshow/ . [IMG]
This is my 41 buick special with a 248 ci straight eight engine and my custom built headers and tri power intake . [IMG]
http://s877.photobucket.com/user/565bbccarbed/slideshow/sbc intake peak flo Yes that is correct
I was thinking the same thing with the 3- 2 barrel holley 94's on my 41 buick straight eight . It cam factory with 2 - 2 barrel strombergs . [IMG]
I have owned this intake for around 10 years and purchased it from a second party off Ebay at that time . Not much info on it from the seller ,...
I look into it . Thanks
I am rebuilding my 1941 buick 248ci straight eight this winter . I was trying to solve a no start when hot issue for the last couple years , some...
welcome , I also loved driving my dads 48 p-51 plymouth special de luxe . peppy along with gas millage around 22 mpg .48 plymouth dads original...
Looks oldsmobile by this youtube video . Watch "Oldsmobile 98 194Straight 8!!! 1st start!: [MEDIA] 1 start! Straight 8!!! 1st start!" on YouTube...
My fix to a factory 1965 ford fairlane - ran the overfull hose to a 16 oz plastic water bottle with the tight hole drilled in the top . This...
Separate names with a comma.
The Jalopy Journal
