The Jalopy Journal
Thanks for all the information. I do have wheel adapters on the rear, I was able to get them one to use for balancing.
So they are telling me they cannot straighten the bent one and it’s pretty bad, this is definitely causing the shimmy in the front end. I’d guess...
I’m about to go pick them up so I’ll see exactly what they found. At least one of them On the front is bad enough to cause a pretty good vibration...
Hello, Any of my Dallas/Fort Worth folks know of a wheel repair shop that can straighten 3 wide 5 wheels. I took them to a repair shop that said...
website: hotrodtrinity.com instagram: @hotrodtrinity Facebook: Hot Rod Trinity Gates open at 9am and go till 9pm and the party doesn't stop till...
For everyone looking for a place to party this weekend come on out to the Hot Rod Trinity hosted by The Dirty Birds Car Club. The show happens at...
1949 Ford Sedan full custom paint shaved trunk handle custom pin striping and scallops. The color is white metallic and burgundy. Its lowered with...
Sounds good. Sent from my iPhone using The H.A.M.B. mobile app
Sounds good I will be selling it after the swap Sent from my iPhone using The H.A.M.B. mobile app
Who all is going to the Lone Star Roundup in Austin? We will be heading out Thursday Morning from Dallas if anyone wants to roll down with us.
[ATTACH] Here is my 60. 302, C-6 Auto. Bias Ply Firestone Whites on 17" steel wheels. I just got done putting Master Power Brakes full front...
That is good information on the later model stuff. I'm surprised someone hasn't come up with a kit to adapter the later stuff since its probably...
I have all of the brake drum components that came off my 1960 F100 for sale. Front and rear complete drum brakes down to the bearings and hoses....
I have the complete front and rear drums off of my 1960 F100. Can the 1957 and up F100 parts be used for this conversion? I hear the bearing...
Update on the motor, I decided to go a different route with this motor. I am building a 331 for my 1960 F100 out of this motor and I plan on...
I have a bunch of pull out SBF engine parts. I am building a 331 so I do not need these anymore, I only kept the block and the push rods. I have...
I have a bunch of pull out SBF engine parts. I am building a 331 so I do not need these anymore. I have a factory crank, a stock cam that looks...
hey guys, I work for Restomodair and classic auto air. Take a look at our universal kits. In the restomod side the haymaker would freeze you out...
I'm guessing 365 horsepower or so then it will be getting a Torqstorm blower so I think it will be a 500hp combo no problem!! Or should I go...
I have an 86 Ford truck 302 that was going in but picked this up today to replace it. 306, Edelbrock aluminum heads, lumpy cam, Offy intake. All...
Done, welded in and ready to mount the upper control arms[ATTACH] [ATTACH]
Made the filler pieces[ATTACH]
The a arms were also to narrow at the mount and were rubbing on the upper mount so I cut that all out and will be fabbing the narrow inserts...
Had issues with my upper a arms binding so I cut and changed the angle [ATTACH][ATTACH]
So long time no post but have gotten some done. Rear is finished [ATTACH] minus the sway bar. After hours of searching and measuring I ended up...
I am in Arlington Texas and I am looking at some space to rent close to me to obviously do hot rod and fab work, bikes etc. at a reasonable...
It has been awhile since I have posted. I spent a bunch of time working on my bike and my 60 F100 and other peoples cars. Anyway have been working...
Congrats on the cover. Posted using the Full Custom H.A.M.B. App!
Got the drivers side done now she goes up and down I cannot seem to post video of it. I will snap more pics later but now moving on to the bag...
Here it goes have to post the URL [IMG]
Separate names with a comma.
The Jalopy Journal
