The Jalopy Journal
your right about NOS just means at least you have a good start. may have to bend up the lips or mounting holes a bit to get fit better but I...
thank you for your ideas
squirrel....how would you go about it??
I will a lot of guys say not to weld the fenders on the fender welting will cover some of the gaps up on it. cant go to any shows they have...
ha ha yes I must be going nuts sitting around...…..so then the question goes out in the bottom corner left as the picture shows the gap its...
[ATTACH] [ATTACH] Hi just wanting to know if any of you body guys would share and or give your 2cents worth on welding rear fenders on this 1941...
well got new plug wires, and cleaned up the distributor, and reset air gap in distributor new springs. started right up and took it for a...
took the distributor apart cleaned all parts added a new spring ordered new wires touching up the valves, still asking about the plugs any input...
ok so then what would be the best advance be to set if the timing is at 4 degrees should the advance be somewhere at 22 hundred to 24 hundred...
ok well where can i get the springs and one side of the advance is working. do the plugs look to lean? brakes not dragging. the timing is at 4...
OK well did a little checking on the motor.... as you can see the plugs seem to be running a little lean and #7 #8 not at all. so valves seem to...
looked at the plugs and they look mostly good nice tan color except the drivers side # 8 # 6 look lean really white. thats all the more i did and...
took it out yesterday for a little drive and it seems like it has no power i had the thing floored and not a lot of response ? but when i get it...
is there issues with the Mallory?
the fuel is new and good. if the valves are the issue i should see a difference in pressure?
they were set about 3years ago and 800 miles
hello guys, my 1941 ford Flathead with offenhauser heads two strombergs and iskymax 1 seems to be not running right idles fine starts up good...
very nice thanks!!!
almost like the blue 46 from verde
thanks it looks ok wish the blue was a little more blue the tan is right on the money!!!!
hello just wondering if I did something wrong? I put a post out there on the Photoshop page at least I think I did. I cant see any response...
hi just wondering what this car would look like if it was two toned? like a light blue on top and champagne on the bottom. or blue on the...
hello i would like to do a two tone color on my 1941 ford coupe a lighter blue and champagne color. i want to split it about half and half, don"t...
flat-O-Matic is the way to go Gene will talk you thru any issues
hello i have heard that a holly 450 has better circuitry than a 390 CFM carb??? your thoughts? its going on a 1941 ford Flathead motor. one...
this picture is when I got the carbs back from him. as far as the jets and power valve I don't know what he had put in the carbs. you must be...
well your right max did do the carbs and he was the one that suggested 2lbs anymore would be bad. the leaking is at the accelerator pump hole. I...
after reading the HRM article that was in a post from patmanta i can see that H&H would recommend two strombergs on an offy intake just like i...
the carb in the back (fire wall) did bog down but i tried two 94s on the same manifold and worked fine when syncing. they are NOT progressive...
sorry got the numbers switched around. the carbs are tied together (not progressive.) yes the motor did bog down when i set the back carb...
Separate names with a comma.