The Jalopy Journal
Yeah, they just told me in several posts that they don't see any use of it. Not cool.
Hi guys I want to make valve lifter indexer to be available to print on 3d printer but i need the bolt pattern including all hole angle from the...
London is in United kingdom ;-) i have EAB sump currently but thanks guys for helping me out
Hi guys. Bough 8CM merc Flathead but the guy who sold it to me said that he lost oil pan for this motor. Will EAC or 8BA pan work? Unless any...
Awesome. Is SBC BBC distributors the same? Sent from my ALE-L21 using H.A.M.B. mobile app
Steves29 so you saying that SBC dizzy mechanical advance don't require resetting? Did you remove that vacuum diaphragm completely or did you just...
Hi guys. I would like to make new distributor based on what Bubba does. I'm not trying to be competition in any kind, it's just a matter that I...
Sure thing Petejoe. It's next on the list. What I'm thinking is maybe hookup oxygen sensor as some kind of exhaust analyser Sent from my ALE-L21...
See i have modern procomp dizzy and cdi ignition. Could't get it to fire.... Took that cdi unit to work stripped and measured all and guess...
12v negative ground Sent from my ALE-L21 using H.A.M.B. mobile app
Got the gauge fitted, but it`s normally with 3 carb setup. i pump now somewhere around 1.5 psi... i feel great now you know. hope has return and...
Carbs are rebuild with vintage speed kit. all 3 are the same... but, procomp stuff is shit. disconected it all and fired up straight away [MEDIA]
Thanks for all your support. PROCOMP cdi box is simply crap. i`ve disconnected it and put old coil and distributor. fired no proble. [MEDIA]
I've started new thread as this no longer relates to ignition. Here is a topic with video I made...
Guys is that what should happened? [MEDIA] Thanks for any advice. Sent from my ALE-L21 using H.A.M.B. mobile app
Didn`t have chance to strip the thing down, but found a bag from the kit. All 3 carbs has the same kit fitted and it saying H-105 .D51 jets 7.5PV
What I do, I'll take them all off and put them on white rag with fuel pump on to see if they leak or something. I already have somewhere like 4...
Update. It's definitely fuel problem. Engine fired up on one carb and 1 psi fuel but it cannot keep going on its own also starts only with the...
.030 gap is ok? Spark plugs are brand new. Just soft black residue on them. Carbs are 3 deuce setup, overhauled. Bought master rebuild kit from...
Oh and before I put facet pump I had holley, and 6 psi pressure Sent from my ALE-L21 using H.A.M.B. mobile app
I will say like that. When i leave it for few minutes, and start cranking, than the engine is about to fire, loads of black smoke comes out and...
Is 2psi fuel pressure OK? What can cause flood? Sparks are black I guess there is excessive fuel in cylinders Sent from my ALE-L21 using H.A.M.B....
Heheh ;-) OK we all know where is it. Call it passenger side for left hand drive cars. (I'm actually from Poland so I used to drive on the right...
It's side mount distributor. Yes, thank you, I know gas is in oil now after lot of cranking. How come can be right hand side when every book,...
Hi guys I hope someone can help with this matter 1950 0BA flathead, rebuild, rebuild carbs 3 deuce intake. Cannot get it to start..... Can...
ok guys, as promised. print, laminate (or not) and tack it to the cam gear with superglue or bluetack or clay or what ever you fancy. Don`t forget...
Hi. I'm just going to make wheel in AutoCAD , laminate it and stick on to cam gear. Should do the same think, just the budget way of doing
Hi guys. Does any one know the right sequence (valve lift/cylinder) for adjusting valve lash? I don't want to keep the crank spinning to see which...
Guys i`m in need of replacement bags/sleeves for my shocks. any one here might have anything available? Ridetech sales/customer support seams not...
I would love to be lucky here in london like you are in USA. I got the frame, 1ba flatty with c4 and axle... just that bloody body is missing;)...
Separate names with a comma.
The Jalopy Journal
