The Jalopy Journal
A car that disassembled, most wouldn't even give an estimate.
No.
Cool pictures David.
If you want to change ratios, better check and see what ratios are available before you decide to buy. Car 12 bolts are so high because of...
If that used a 400 crank, you have to use a 400 flywheel. It is externally balanced. The hormonics set up by not using one can cause the ringear...
Have you fixed it or found out what's going on yet
Way overpriced I think. Know of a nice 54 convertible that about 18 months ago went for less than that. But if you decide you want it, MAKE time...
You didn't say specifically what trans and yoke you have but if the yoke has a hole in it then either it has a groove machined in the smooth part...
You are correct, I shouldn't. But it really irks me when someone asks a legit question, like the person who started this thread, and then all the...
You guys with the dingle ball hones are shade trees that don't know your ass from a hole in the ground. As for the original question- the answer...
Surface rust in an intake that has been setting for 5 years is not abnormal. Humidity and heating and cooling does that. Here things rust setting...
What about a ford 9", a turbo 350, disc brakes, 4speeds, wide wheels and tires, stereos, and etc. None of this was around in the 50's. Most...
Its just like any education. Its not free and you're not going to learn any younger. The primary thang is don't screw up by hurrying and...
Guys, back in 60's (don't know if all had them, but certain about 1963) GMC's with the boat anchor 305's had pcv valves that went inside the valve...
Build a dam around it with putty and fill it with vinegar. The vinegar is acidic and dissolves the corroded aluminum. If it doesn't work after...
You can't because the car has to be physically in an approved inspection stall and dps says it has to have a safety inspectionat the same time,...
Yes they could, but you could tell by jacking up the car and spining the wheel to check out of round. Another thing- two or three yrs ago agood...
Check out clocksandguages.com. they have kits to convert nearly all borg movements or do the work for you. I've even used kits from jc whitney.
Probably had M&H RACEMASTERS 8" wide or less in stock. 10" in f/x
THAT'S it try 4 wd forums.
Some of these had cast aluminum shields for HD apps. Don't know specifics but I remember seeing them back in the 80's. Those had 5/16 ( I think)...
You are rt, but remember he's talking buick not pos ford!! Mine with the factory stylized wheels and t/a radials looks just rt. There is a lot of...
1971-1976 gm B- body - sedans 121", wagons 127-128" 77-84 big chassis( think they were still B body) olds and buick- 119" 68-72 Vista...
I built one about 10 yrs ago 16x25. Used cinder block supports on 6' centers with 2x8 jousts and 21/32" subfloor topped with 1/2" mdf tongue and...
PLEASE POST THEM! This car led to several changes in NHRA rules- the max height from ground to crank centerline for one.
Guys aren't looking to shaft you. Most of us would give plenty of leeway. There is bound to be a shop close to you. Just go ask. Take a look at...
There are at least a 100 times as many corvette engines as there were covette produced. There is no difference between a corvette and any other...
Sorry man, I didn't notice your location, go with TR's help.
Take one to a napa store along with a vernier and match it up in one of their catalogs. They still have paper catalogs for things like this.
Take into account that pioneer, mr.gasket, and most moroso parts are chinese crap now days. You are better off stock than this crap. If you use a...
Separate names with a comma.
The Jalopy Journal
